From 46621773c54ea03ff6bcf49bc527b8ba91f8b87e Mon Sep 17 00:00:00 2001 From: Lurkars Date: Sun, 6 Feb 2022 10:28:07 +0100 Subject: [PATCH] fix readme --- README.md | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/README.md b/README.md index 2855e72..4387597 100644 --- a/README.md +++ b/README.md @@ -56,11 +56,11 @@ Establish a ssh connection to your Pi: - the Pi should be reachable under `raspberrypi` or `raspberrypi.local` in your network, if not try to find out it's IP address from your router. - default username is `pi` and default password is `raspberry` - Example: `ssh pi@raspberrypi.local` or `ssh pi@192.168.2.100` -> ⚠️ Warning: you should change the default passwort by executing `passwd` after login +> ⚠️ Warning: you should change the default password by executing `passwd` after login ### Automatic setup -> ⚠️ Warning: executing scripts from the internet without checking is bad. This is only done to get things done fast. In any doubts you can perform the [Manual setup](#manual-setup) and execute all commands step-by-setop to understand what's going on. +> ⚠️ Warning: executing scripts from the internet without checking is bad. This is only done to get things done fast. In any doubts you can perform the [Manual setup](#manual-setup) and execute all commands step-by-step to understand what's going on. - download and excecute setup script (you will be prompted to confirm certain steps beforehand anyway) > `curl https://git.bstly.de/Lurkars/luniebox/raw/branch/main/luniebox.sh -o luniebox.sh` @@ -99,9 +99,9 @@ setup application > > `cp /home/pi/luniebox/contrib/config/luniebox.cfg /home/pi/luniebox/config/luniebox.cfg` > -> `sudo cp /home/pi/luniebox/contrib/luniebox-app.service /etc/systemd/system/` +> `sudo cp /home/pi/luniebox/contrib/service/luniebox-app.service /etc/systemd/system/` > -> `sudo cp /home/pi/luniebox/contrib/luniebox-daemon.service /etc/systemd/system/` +> `sudo cp /home/pi/luniebox/contrib/service/luniebox-daemon.service /etc/systemd/system/` > > `sudo systemctl daemon-reload` > @@ -115,7 +115,7 @@ setup spotifyd > > `cp /home/pi/luniebox/contrib/config/spotifyd.cfg /home/pi/luniebox/config/spotifyd.cfg` (if you use other audio hardware, you may need to adjust the `backend` and `device` properties to your needs!) > -> `sudo cp /home/pi/luniebox/contrib/spotifyd.service /etc/systemd/system/` +> `sudo cp /home/pi/luniebox/contrib/service/spotifyd.service /etc/systemd/system/` > > `sudo systemctl daemon-reload` > @@ -152,7 +152,7 @@ setup ClSpotify ##### enable SPI for RFID Reader uncomment `dtparam=spi=on` in `/boot/config.txt` -> `sudo sed -i '/dtparam=spi=on/s/^#//g' /boot/config.txt` +> `sudo sed -i "/dtparam=spi=on/s/^#//g" /boot/config.txt` ##### enable I2C for MPU9250 9-axis sensor @@ -160,7 +160,7 @@ install `i2c-tools` and `python3-smbus` > `sudo apt install -y i2c-tools python3-smbus` uncomment `dtparam=i2c_arm=on` in `/boot/config.txt` -> `sudo sed -i '/dtparam=i2c_arm=on/s/^#//g' /boot/config.txt` +> `sudo sed -i "/dtparam=i2c_arm=on/s/^#//g" /boot/config.txt` add `dtoverlay=i2c-gpio,bus=4,i2c_gpio_delay_us=1,i2c_gpio_sda=23,i2c_gpio_scl=24` to `/boot/config.txt` @@ -171,7 +171,7 @@ add `dtoverlay=i2c-gpio,bus=4,i2c_gpio_delay_us=1,i2c_gpio_sda=23,i2c_gpio_scl=2 ##### for Pimoroni Amp or DAC disable onboard audio comment out `dtparam=audio=on` in `/boot/config.txt` -> `sudo sed -i '/dtparam=audio=on/s/^/#/g' /boot/config.txt` +> `sudo sed -i "/dtparam=audio=on/s/^/#/g" /boot/config.txt` setup hifiberry-dac by adding ``` @@ -183,7 +183,7 @@ to `/boot/config.txt` ##### for Adafruit Speaker Bonnet for Raspberry Pi disable onboard audio comment out `dtparam=audio=on` in `/boot/config.txt` -> `sudo sed -i '/dtparam=audio=on/s/^/#/g' /boot/config.txt` +> `sudo sed -i "/dtparam=audio=on/s/^/#/g" /boot/config.txt` setup hifiberry-dac and i2s by adding ```