fix + new case design

application/spotify.py

@@ -232,7 +232,7 @@ class Spotify(object):
         data = {}
 
         if uri:
-            if uri.startswith('spotify:track:'):
+            if uri.startswith('spotify:track:') or uri.startswith('spotify:episode:'):
                 data = {
                     "uris": [uri]
                 }

hardware/case/square/luniebox-back.scad

@@ -4,15 +4,6 @@ module luniebox_back() {
   difference() {
       union() {
           cube([length+depth,height+depth,depth]);
-          // screws RFID MC522
-          translate([length/2-22,height*0.6-13.5,depth])
-          screw();
-          translate([length/2-22,height*0.6+13.5,depth])
-          screw();
-          translate([length/2+16.5,height*0.6-18,depth])
-          screw();
-          translate([length/2+16.5,height*0.6+18,depth])
-          screw();
           // clips
           translate([clip_space,0,0])
           clip_screw();
@@ -35,11 +26,14 @@ module luniebox_back() {
           rotate([0,0,90])
           clip_screw();
       }
-      // USB port hole
-      translate([54+depth,14+depth,0])
-      rounded_cube(s=[10,6,depth],r=1.5);
-      translate([38,20+depth,-render_limiter])
-      cube([10,1.5,depth+render_limiter*2]);
+      // UPS hat hole
+      translate([length-12-50,18,-render_limiter])
+      cube([45,6,depth+render_limiter*2]);
+      // light holes
+      translate([20,21,-render_limiter])
+      screw_hole(depth);
+      translate([30,21,-render_limiter])
+      screw_hole(depth);
   }
 }
 

hardware/case/square/luniebox-bottom.scad

@@ -18,18 +18,23 @@ module luniebox_bottom() {
           rotate([0,0,90])
           clip_screw();  
           // screws Raspi Zero
-          translate([length-10,5+depth,depth])
+          translate([15,40+depth,depth])
           screw();
-          translate([length-68,5+depth,depth])
+          translate([73,40+depth,depth])
           screw();
-          translate([length-10,28+depth,depth])
+          translate([15,63+depth,depth])
           screw();
-          translate([length-68,28+depth,depth])
+          translate([73,63+depth,depth])
           screw();
+          // screws UPS HAT
+          translate([15,5+depth,depth])
+          screw(h=24);
+          translate([74,5+depth,depth])
+          screw(h=24);
           // screws MCP
-          translate([length/2-7.5,width/2-7+depth,depth])
+          translate([length/2-7.5,width/2+35-7+depth,depth])
           screw();
-          translate([length/2+7.5,width/2-7+depth,depth])
+          translate([length/2+7.5,width/2+35-7+depth,depth])
           screw();
       }
       // clip holes
@@ -37,9 +42,9 @@ module luniebox_bottom() {
       clip_hole();
       translate([clip_length_space,depth+clip_d/2,0])
       clip_hole();
-      translate([clip_space,width-clip_d/2,0])
+      translate([clip_space,width-clip_d/2 - front_offset,0])
       clip_hole();
-      translate([clip_length_space,width-clip_d/2,0])
+      translate([clip_length_space,width-clip_d/2 - front_offset,0])
       clip_hole();
   }
 }

hardware/case/square/luniebox-front-panel.scad

@@ -0,0 +1,58 @@
+include<luniebox-helper.scad>
+
+module luniebox_front_panel() {
+
+  grill_width=2;
+
+  difference() {
+      union() {
+          cube([length+depth,height+depth,depth]);
+      }
+      // speaker hole middle
+      translate([length/2,height/2,-depth / 2])
+      cylinder(d=103,h=depth*2);
+  }
+  for ( i = [grill_width*2 : grill_width*2 : 51.5] ) {
+    translate([length/2,height/2,depth/2])
+    difference () {
+      cylinder (h = depth, r=i+grill_width/2, center = true);
+      cylinder (h = depth*2, r=i-grill_width/2, center = true);
+    }
+  }
+
+  translate([length/2,height/2,0])
+  rotate([0,0,-45])
+  translate([-grill_width/2,grill_width*1.5,0])
+  cube([grill_width,51.5,depth]);
+  
+  translate([length/2,height/2,0])
+  rotate([0,0,45])
+  translate([-grill_width/2,grill_width*1.5,0])
+  cube([grill_width,51.5,depth]);
+  
+  translate([length/2,height/2,0])
+  rotate([0,0,-135])
+  translate([-grill_width/2,grill_width*1.5,0])
+  cube([grill_width,51.5,depth]);
+  
+  translate([length/2,height/2,0])
+  rotate([0,0,135])
+  translate([-grill_width/2,grill_width*1.5,0])
+  cube([grill_width,51.5,depth]);
+
+
+  // screws front
+  translate([5,5+depth,depth])
+  screw(h=front_offset-depth);
+  translate([5,width-5+depth,depth])
+  screw(h=front_offset-depth);
+  translate([length-5,5+depth,depth])
+  screw(h=front_offset-depth);
+  translate([length-5,width-5+depth,depth])
+  screw(h=front_offset-depth);
+}
+
+luniebox_front_panel();
+
+
+

hardware/case/square/luniebox-front.scad

@@ -4,24 +4,15 @@ module luniebox_front() {
   difference() {
       union() {
           cube([length+depth,height+depth,depth]);
-          // screws speaker right
-          translate([height/2-22.5,height/2-22.5,depth])
-          screw();
-          translate([height/2+22.5,height/2-22.5,depth])
-          screw();
-          translate([height/2-22.5,height/2+22.5,depth])
-          screw();
-          translate([height/2+22.5,height/2+22.5,depth])
-          screw();
-          // screws speaker left
-          translate([length-height/2-22.5,height/2-22.5,depth])
-          screw();
-          translate([length-height/2+22.5,height/2-22.5,depth])
-          screw();
-          translate([length-height/2-22.5,height/2+22.5,depth])
-          screw();
-          translate([length-height/2+22.5,height/2+22.5,depth])
-          screw();
+          // screws speaker middle
+          translate([length/2-40.5,height/2-40.5,depth])
+          screw(d=10);
+          translate([length/2+40.5,height/2-40.5,depth])
+          screw(d=10);
+          translate([length/2-40.5,height/2+40.5,depth])
+          screw(d=10);
+          translate([length/2+40.5,height/2+40.5,depth])
+          screw(d=10);
           // clips
           translate([clip_space,0,0])
           clip_screw();
@@ -44,29 +35,27 @@ module luniebox_front() {
           rotate([0,0,90])
           clip_screw();
       }
-      // speaker hole right
-      translate([height/2,height/2,-depth / 2])
-      cylinder(d=50,h=depth*2);
-      // speaker hole left
-      translate([length-height/2,height/2,-depth / 2])
-      cylinder(d=50,h=depth * 2);
-      // screw holes speaker right
-      translate([height/2-22.5,height/2-22.5,depth])
+      // speaker hole middle
+      translate([length/2,height/2,-depth / 2])
+      cylinder(d=103,h=depth*2);
+      // screw holes speaker middle
+      translate([length/2-40.5,height/2-40.5,depth])
+      screw_hole(depth,d=5);
+      translate([length/2+40.5,height/2-40.5,depth])
+      screw_hole(depth,d=5);
+      translate([length/2-40.5,height/2+40.5,depth])
+      screw_hole(depth,d=5);
+      translate([length/2+40.5,height/2+40.5,depth])
+      screw_hole(depth,d=5);
+
+      // screws holes front panel
+      translate([5,5+depth,depth])
       screw_hole(depth);
-      translate([height/2+22.5,height/2-22.5,depth])
+      translate([5,width-5+depth,depth])
       screw_hole(depth);
-      translate([height/2-22.5,height/2+22.5,depth])
+      translate([length-5,5+depth,depth])
       screw_hole(depth);
-      translate([height/2+22.5,height/2+22.5,depth])
-      screw_hole(depth);
-      // screw holes speaker left
-      translate([length-height/2-22.5,height/2-22.5,depth])
-      screw_hole(depth);
-      translate([length-height/2+22.5,height/2-22.5,depth])
-      screw_hole(depth);
-      translate([length-height/2-22.5,height/2+22.5,depth])
-      screw_hole(depth);
-      translate([length-height/2+22.5,height/2+22.5,depth])
+      translate([length-5,width-5+depth,depth])
       screw_hole(depth);
   }
 }

hardware/case/square/luniebox-helper.scad

@@ -4,12 +4,12 @@ $fs = 0.05;
 render_limiter = 0.001;
 
 depth = 2;
-length = 100;
-width = 100;
-height = 100;
+length = 120;
+width = 120;
+height = 120;
 
-
-clip_space=20;
+front_offset=10+depth*2;
+clip_space=30;
 clip_d=5;
 clip_h=6;
 clip_length_space=length - clip_space + depth;
@@ -44,9 +44,9 @@ module clip(width=15) {
     cube([width +render_limiter * 2,depth + render_limiter * 2,depth + render_limiter * 2]);
 }
 
-module screw_hole(depth=0,d=clip_d/2) {
+module screw_hole(depth=0,d=clip_d/2,height=clip_h) {
     z= -depth - render_limiter;
-    h=7+depth;
+    h=height+depth+1;
     translate([0,0,z])
     cylinder(d=d,h=h);
 }
@@ -54,7 +54,7 @@ module screw_hole(depth=0,d=clip_d/2) {
 module screw(d=clip_d,h=clip_h) {
     difference() {
         cylinder(d=d,h=h);
-        screw_hole(d=d/2);
+        screw_hole(d=d/2,height=h);
     }
 }
 

hardware/case/square/luniebox-side.scad

@@ -18,9 +18,9 @@ module luniebox_side() {
       translate([clip_d/2+depth,clip_height_space+depth,0])
       clip_hole();
   
-      translate([width-clip_d/2,clip_space+depth,0])
+      translate([width-clip_d/2-front_offset,clip_space+depth,0])
       clip_hole();
-      translate([width-clip_d/2,clip_height_space+depth,0])
+      translate([width-clip_d/2-front_offset,clip_height_space+depth,0])
       clip_hole();
     
   }

hardware/case/square/luniebox-top.scad

@@ -4,6 +4,15 @@ module luniebox_top() {
   difference() {
       union() {
           cube([length+depth,width+depth,depth]);
+          // screws RFID MC522
+          translate([length/2-22,height*0.55-13.5,depth])
+          screw();
+          translate([length/2-22,height*0.55+13.5,depth])
+          screw();
+          translate([length/2+16.5,height*0.55-18,depth])
+          screw();
+          translate([length/2+16.5,height*0.55+18,depth])
+          screw();
           // clips
           translate([clip_h,clip_space,0])
           rotate([0,0,90])
@@ -19,27 +28,20 @@ module luniebox_top() {
           clip_screw();
       }
       // clip holes
-      translate([clip_space,depth+clip_d/2,0])
+      translate([clip_space,depth+clip_d/2+front_offset,0])
       clip_hole();
-      translate([clip_length_space,depth+clip_d/2,0])
+      translate([clip_length_space,depth+clip_d/2+front_offset,0])
       clip_hole();
       translate([clip_space,width-clip_d/2,0])
       clip_hole();
       translate([clip_length_space,width-clip_d/2,0])
       clip_hole();
       // right btn hole
-      translate([length/2-25+depth,(width+depth)/2,-depth/2])
-      cylinder(d=30,h=depth*2);
+      translate([length/2-10+depth,(width+depth)/6+front_offset,-depth/2])
+      cylinder(d=3,h=depth*2);
       // left button hole
-      translate([length/2+25+depth,(width+depth)/2,-depth/2])
-      cylinder(d=30,h=depth*2);
-      // led holes
-      translate([length/2+depth,(width+depth)/2-16.666,-depth/2])
-      cylinder(d=2,h=depth*2);
-      translate([length/2+depth,(width+depth)/2,-depth/2])
-      cylinder(d=2,h=depth*2);
-      translate([length/2+depth,(width+depth)/2+16.666,-depth/2])
-      cylinder(d=2,h=depth*2);
+      translate([length/2+10+depth,(width+depth)/6+front_offset,-depth/2])
+      cylinder(d=3,h=depth*2);
   }
 }
 

hardware/case/square/luniebox.scad

@@ -1,6 +1,7 @@
 include<luniebox-helper.scad>
 use<luniebox-bottom.scad>
 use<luniebox-front.scad>
+use<luniebox-front-panel.scad>
 use<luniebox-side.scad>
 use<luniebox-top.scad>
 use<luniebox-back.scad>
@@ -9,10 +10,15 @@ color(c=[1,0.1,0.1])
 luniebox_bottom();
 
 color(c=[0.2,1,0.2])
-translate([0,width+depth,depth])
+translate([0,width+depth-front_offset,depth])
 rotate([90,0,0])
 luniebox_front();
 
+color(c=[0.2,1,0.9])
+translate([0,width+depth,depth])
+rotate([90,0,0])
+luniebox_front_panel();
+
 color(c=[0.3,0.3,1])
 translate([-depth,0,0])
 rotate([90,0,90])