added dependable build for interface choice in menuconfig

README.md

@@ -24,26 +24,35 @@ The following acronyms will be used in code and comments:
 
 ### Additional features for full ENA device
 
-#### Custom device
+Interface with display and input to
+  * show exposure status
+  * connect to WiFi
+  * delete data
+  * set language (currently supported: English and German)
+  * set timezone
+  * enter tan and uploading own exposure keys
+  * set time and date (if no RTC/NTP available)
+
+#### supported devices
+
+##### M5StickC and M5StickC PLUS
+* RTC support
+* display support
+* PMU support
+* input with 2 buttons and accelerometer control
+  * ok/cancel with button 1 and button 2 (depending on screen orientation)
+  * up, down, left, right by tilting device
+  * long press button 1 for changing character set on input
+
+##### Custom device
 * RTC support with DS3231 (for correct system time)
 * display support with SSD1306
-* interface with a 7 button control (joystick up,down,left,right,enter,cancel,ok) to
+* input with a 7 button control (joystick up,down,left,right,enter,cancel,ok) 
-    * show exposure status
-    * set time
-    * connect to WiFi
-    * delete data
-    * set language
-    * enter tan and uploading own exposure keys
 * battery support with ESP32 development boards with integrated LiPo support
 
-#### M5StickC and M5StickC PLUS
+##### LILYGO TTGO T-Wristband \[in development\]
-* RTC support
-* PMU support
 * display support
-* interface with 2 buttons and accelerometer control
+* RTC and input in development
-  * ok/cancel with button 1 and button 2 (depending on screen orientation)
-  * up, down, left, right with tilting device
-  * long press button 1 for changing character set on input
 
 ### Limitations/Problems/Questions
 * WiFi or other external connection needed for infections status (auto-connect to open WiFis?)
@@ -95,9 +104,16 @@ idf.py menuconfig
 > Component config -> mbedTLS -> [*] HKDF algorithm (RFC 5869)
 * flash size > 3.9GB
 > Serial flasher config -> Flash size ->  (x) 4MB
-* choose interface device (custom, M5StickC or M5StickC PLUS)
+* choose interface device (custom, M5StickC, M5StickC PLUS, TTGO T-Wristband \[in development\])
 > ENA Interface -> ENA Interface device
 
+***important***
+
+If you ran into error ``region 'iram0_0_seg' overflowed by xxx bytes`` you can try disabling WiFi IRAM optimization
+> Component config -> Wi-Fi -> WiFi IRAM speed optimization -> ( )
+ 
+> Component config -> Wi-Fi -> WiFi RX IRAM speed optimization -> ( )
+
 **recommended**
 * BLE *Scan Duplicate* (By Device Address and Advertising Data)
 > Component config -> Bluetooth -> Bluetooth controller -> Scan Duplicate Type -> (X) Scan Duplicate By Device Address And Advertising Data
@@ -107,11 +123,7 @@ idf.py menuconfig
 > Component config -> Log output -> Default log verbosity -> (X) Debug
 * Exposure Notification API / Storage enable *Dump storage*
 > Exposure Notification API -> Storage -> [X] Dump storage
- 
-#### Configure device manually!
 
-Select required device drivers manually, because config get not applied in interface's CmakeLists.txt (I don't know why!):
-> comment in/out line in *components/interface/CmakeLists.txt* with matching interface 
 
 #### Configure SSL cert manually!
 
@@ -168,65 +180,65 @@ Request URL is parametrized with {day-string},({hour} in hourly mode,) {page}, {
 
 Adds interface functionality for control and setup.
 
+#### interface/custom-input
+
+Interface input with 7 button input.
+
+#### interface/m5-input
+
+Interface input for M5StickC (PLUS) with 2 button input and accelerometer as axis input.
+
+#### interface-m5-mpu6886
+
+I²C driver for MPU6886 6-Axis IMU of M5StickC (PLUS).
+
+#### interface/ttgo-input \[in development\]
+
+Interface input for TTGO T-Wristband with 1 button input and accelerometer as axis input.
+
+#### interface/ttgo-lsm9ds1 \[in development\]
+
+I²C driver for LSM9DS1 6-Axis IMU of TTGO T-Wristband.
+
 ### display
 
 General module for display and gfx.
 
+#### display/custom-ssd1306
+
+I²C driver for a SSD1306 display, implementation of [display](#-display) module.
+
+### display/m5-axp192
+
+I²C driver for AXP192 PMU of M5StickC (PLUS).
+
+#### display/m5-st7735s
+
+SPI driver for a ST7735s display of M5StickC, implementation of [display](#-display) module.
+
+#### display/m5-st7789
+
+SPI driver for a ST7789 display of M5StickC PLUS, implementation of [display](#-display) module
+
+#### display/ttgo-st7735
+
+SPI driver for a ST7735 display of TTGO T-Wristband, implementation of [display](#-display) module.
+
 ### rtc
 
 General module for set/get time from RTC.
 
-### i2c-main
+#### rtc/custom-ds3231
-
-Just start I²C driver.
-
-### interface-custom-input
-
-Interface with 7 button input.
-
-### interface-m5-input
-
-Interface with input for M5StickC (PLUS) with 2 button input and accelerometer as axis input.
-
-### interface-ttgo-input \[in development\]
-
-Interface with input for TTGO T-Wristband with 1 button input and accelerometer as axis input.
-
-### rtc-custom-ds3231
 
 I²C driver for a DS3231 RTC, implementation of [rtc](#-rtc) module.
 
-### rtc-m5-bm8563
+#### rtc/m5-bm8563
 
 I²C driver for BM8563 of M5StickC (PLUS), implementation of [rtc](#-rtc) module.
 
-### display-custom-ssd1306
+### i2c-main
 
-I²C driver for a SSD1306 display, implementation of [display](#-display) module.
+Just start I²C driver.
-
-### display-m5-st7735s
-
-SPI driver for a ST7735s display of M5StickC, implementation of [display](#-display) module.
-
-### display-m5-st7789
-
-SPI driver for a ST7789 display of M5StickC PLUS, implementation of [display](#-display) module
-
-### display-ttgo-st7735
-
-SPI driver for a ST7735 display of TTGO T-Wristband, implementation of [display](#-display) module.
-
-### imu-m5-mpu6886
-
-I²C driver for MPU6886 6-Axis IMU of M5StickC (PLUS).
-
-### imu-ttgo-lsm9ds1 \[in development\]
-
-I²C driver for LSM9DS1 6-Axis IMU of TTGO T-Wristband.
-
-### pmu-m5-axp192
-
-I²C driver for AXP192 PMU of M5StickC (PLUS).
 
 ### ena-binary-export  \[deprecated\]
 

components/display-custom-ssd1306/CMakeLists.txt

@@ -1,8 +0,0 @@
-idf_component_register(
-    SRCS 
-        "ssd1306.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES
-        "display"
-        "i2c-main"
-)

components/display-m5-st7735s/CMakeLists.txt

@@ -1,9 +0,0 @@
-idf_component_register(
-    SRCS 
-        "st7735s.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES
-        "display"
-        "spi_flash"
-        "pmu-m5-axp192"
-)

components/display-m5-st7789/CMakeLists.txt

@@ -1,9 +0,0 @@
-idf_component_register(
-    SRCS 
-        "st7789.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES
-        "display"
-        "spi_flash"
-        "pmu-m5-axp192"
-)

components/display-ttgo-st7735/CMakeLists.txt

@@ -1,8 +0,0 @@
-idf_component_register(
-    SRCS 
-        "st7735.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES
-        "display"
-        "spi_flash"
-)

components/display/CMakeLists.txt

@@ -1,6 +1,28 @@
+set(src_list "display.c" "display-gfx.c")
+set(include_list ".")
+
+if(CONFIG_ENA_INTERFACE_DISPLAY_SSD1306)
+     list(APPEND src_list "custom-ssd1306/ssd1306.c")
+     list(APPEND include_list "custom-ssd1306")
+elseif(CONFIG_ENA_INTERFACE_M5STICKC)
+    list(APPEND src_list "m5-st7735s/st7735s.c" "m5-axp192/axp192.c")
+    list(APPEND include_list "m5-st7735s" "m5-axp192")
+elseif(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
+    list(APPEND src_list "m5-st7789/st7789.c" "m5-axp192/axp192.c")
+    list(APPEND include_list "m5-st7789" "m5-axp192")
+elseif(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
+    list(APPEND src_list "ttgo-st7735/st7735.c")
+    list(APPEND include_list "ttgo-st7735")
+else()
+    list(APPEND src_list "dummy.c")
+endif()
+
 idf_component_register(
     SRCS 
-        "display.c"
+        ${src_list}
-        "display-gfx.c"
+    INCLUDE_DIRS
-    INCLUDE_DIRS "."
+        ${include_list}
+    PRIV_REQUIRES
+        "i2c-main"
+        "spi_flash"
 )

components/display/display.h

@@ -34,6 +34,63 @@
 #define CYAN 0x07FF
 #define PURPLE 0xF81F
 
+/**
+ * @brief initalize display 
+ * 
+ * MUST BE DEFINED DEVICE SPECIFIC
+ * 
+ */
+void display_start(void);
+
+/**
+ * @brief clear the display
+ *  
+ * MUST BE DEFINED DEVICE SPECIFIC
+ * 
+ * @param[in] line the line to clear
+ * @param[in] invert if true, image is inverted
+ */
+void display_clear_line(uint8_t line, bool invert);
+
+/**
+ * @brief clear the display
+ *  
+ * MUST BE DEFINED DEVICE SPECIFIC
+ * 
+ */
+void display_clear(void);
+
+/**
+ * @brief set display on or off
+ *  
+ * MUST BE DEFINED DEVICE SPECIFIC
+ * 
+ * @param[in] on true if display on, false if display off
+ */
+void display_on(bool on);
+
+/**
+ * @brief set display flipped or not
+ * 
+ * MUST BE DEFINED DEVICE SPECIFIC
+ * 
+ * @param[in] on true display is flipped
+ */
+void display_flipped(bool flipped);
+
+/**
+ * @brief write raw bytes to display line at starting column
+ * 
+ * MUST BE DEFINED DEVICE SPECIFIC
+ * 
+ * @param[in] data bytes to display  
+ * @param[in] length length of data
+ * @param[in] line the line to write to
+ * @param[in] offset number of offset chars to start
+ * @param[in] invert if true, image is inverted
+ */
+void display_data(uint8_t *data, size_t length, uint8_t line, uint8_t offset, bool invert);
+
 /**
  * 
  */
@@ -44,55 +101,11 @@ void display_utf8_to_ascii(char *input, char *output);
  */
 uint8_t *display_text_to_data(char *text, size_t text_length, size_t *length);
 
-/**
- * @brief initalize display
- */
-void display_start(void);
-
-/**
- * @brief clear the display
- * 
- * @param[in] line the line to clear
- * @param[in] invert if true, image is inverted
- */
-void display_clear_line(uint8_t line, bool invert);
-
-/**
- * @brief clear the display
- * 
- */
-void display_clear(void);
-
-/**
- * @brief set display on or off
- * 
- * @param[in] on true if display on, false if display off
- */
-void display_on(bool on);
-
-/**
- * @brief set display flipped or not
- * 
- * @param[in] on true display is flipped
- */
-void display_flipped(bool flipped);
-
 /**
  * 
  */
 uint8_t *display_text_to_data(char *text, size_t text_length, size_t *length);
 
-/**
- * @brief write raw bytes to display line at starting column
- * 
- * @param[in] data bytes to display  
- * @param[in] length length of data
- * @param[in] line the line to write to
- * @param[in] offset number of offset chars to start
- * @param[in] invert if true, image is inverted
- */
-void display_data(uint8_t *data, size_t length, uint8_t line, uint8_t offset, bool invert);
-
 /**
  * @brief write chars to display
  * 

components/display/dummy.c

@@ -0,0 +1,39 @@
+// Copyright 2020 Lukas Haubaum
+//
+// Licensed under the GNU Affero General Public License, Version 3;
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     https://www.gnu.org/licenses/agpl-3.0.html
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#include <string.h>
+#include "display.h"
+
+void display_start(void)
+{
+}
+
+void display_clear_line(uint8_t line, bool invert)
+{
+}
+
+void display_clear(void)
+{
+}
+
+void display_on(bool on)
+{
+}
+
+void display_data(uint8_t *data, size_t length, uint8_t line, uint8_t offset, bool invert)
+{
+}
+
+void display_flipped(bool flipped)
+{
+}

components/ena/ena-bluetooth-scan.c

@@ -26,6 +26,8 @@ static int scan_status = ENA_SCAN_STATUS_NOT_SCANNING;
 
 static const uint16_t ENA_SERVICE_UUID = 0xFD6F;
 
+static int last_scan_num;
+
 static esp_ble_scan_params_t ena_scan_params = {
     .scan_type = BLE_SCAN_TYPE_ACTIVE,
     .own_addr_type = BLE_ADDR_TYPE_RANDOM,
@@ -37,7 +39,6 @@ static esp_ble_scan_params_t ena_scan_params = {
 
 void ena_bluetooth_scan_event_callback(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param)
 {
-
     uint32_t unix_timestamp = (uint32_t)time(NULL);
     esp_ble_gap_cb_param_t *p = (esp_ble_gap_cb_param_t *)param;
     switch (event)
@@ -70,6 +71,7 @@ void ena_bluetooth_scan_event_callback(esp_gap_ble_cb_event_t event, esp_ble_gap
                 uint8_t *aem = malloc(ENA_AEM_METADATA_LENGTH);
                 memcpy(aem, &service_data[sizeof(ENA_SERVICE_UUID) + ENA_KEY_LENGTH], ENA_AEM_METADATA_LENGTH);
                 ena_beacon(unix_timestamp, rpi, aem, p->scan_rst.rssi);
+                last_scan_num++;
                 free(rpi);
                 free(aem);
             }
@@ -98,6 +100,7 @@ void ena_bluetooth_scan_init(void)
 void ena_bluetooth_scan_start(uint32_t duration)
 {
     scan_status = ENA_SCAN_STATUS_SCANNING;
+    last_scan_num = 0;
     ESP_ERROR_CHECK(esp_ble_gap_start_scanning(duration));
 }
 
@@ -111,3 +114,8 @@ int ena_bluetooth_scan_get_status(void)
 {
     return scan_status;
 }
+
+int ena_bluetooth_scan_get_last_num(void)
+{
+    return last_scan_num;
+}

components/ena/include/ena-bluetooth-scan.h

@@ -66,4 +66,12 @@ void ena_bluetooth_scan_stop(void);
  */
 int ena_bluetooth_scan_get_status(void);
 
+/**
+ * @brief       return the num of found devices in last scan
+ * 
+ * @return
+ *              num of last beacons
+ */
+int ena_bluetooth_scan_get_last_num(void);
+
 #endif

components/i2c-main/Kconfig.projbuild

@@ -1,15 +0,0 @@
-menu "I²C"
-	
-	config I2C_SDA_PIN
-		int "I²C sda pin"
-		default 21
-
-	config I2C_SCL_PIN
-		int "I²C scl pin"
-		default 22
-
-	config I2C_CLOCKSPEED
-		int "I²C clock speed"
-		default 1000000
-
-endmenu

components/i2c-main/i2c-main.h

@@ -20,9 +20,14 @@
 #ifndef _i2c_main_H_
 #define _i2c_main_H_
 
+#if defined(CONFIG_ENA_INTERFACE_CUSTOM)
 #define I2C_SDA_PIN (CONFIG_I2C_SDA_PIN)
 #define I2C_SCL_PIN (CONFIG_I2C_SCL_PIN)
-#define I2C_CLK_SPEED (CONFIG_I2C_CLOCKSPEED)
+#else
+#define I2C_SDA_PIN 21
+#define I2C_SCL_PIN 22
+#endif
+#define I2C_CLK_SPEED (1000000)
 
 /**
  * @brief initialize main I2C interface

components/imu-m5-mpu6886/CMakeLists.txt

@@ -1,7 +0,0 @@
-idf_component_register(
-    SRCS 
-        "mpu6886.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES 
-        i2c-main
-)

components/imu-ttgo-lsm9ds1/CMakeLists.txt

@@ -1,7 +0,0 @@
-idf_component_register(
-    SRCS 
-        "lsm9ds1.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES 
-        i2c-main
-)

components/interface-custom-input/CMakeLists.txt

@@ -1,7 +0,0 @@
-idf_component_register(
-    SRCS 
-        "custom-input.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES 
-        interface
-)

components/interface-m5-input/CMakeLists.txt

@@ -1,8 +0,0 @@
-idf_component_register(
-    SRCS 
-        "m5-input.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES 
-        interface
-        imu-m5-mpu6886
-)

components/interface-ttgo-input/CMakeLists.txt

@@ -1,8 +0,0 @@
-idf_component_register(
-    SRCS 
-        "ttgo-input.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES 
-        interface
-        imu-ttgo-lsm9ds1
-)

components/interface/CMakeLists.txt

@@ -1,33 +1,40 @@
-set(priv_requires "ena" "ena-eke-proxy" "display" "rtc" "wifi-controller" )
+set(src_list 
+    "interface.c"
+    "interface-main.c"
+    "interface-data.c"
+    "interface-datetime.c"
+    "interface-info.c"
+    "interface-input.c"
+    "interface-label.c"
+    "interface-report.c"
+    "interface-settings.c"
+    "interface-wifi.c")
 
-if(CONFIG_ENA_INTERFACE_CUSTOM)
+set(include_list ".")
-     list(APPEND priv_requires "display-custom-ssd1306" "rtc-custom-ds3231")
+
-elseif(CONFIG_ENA_INTERFACE_M5STICKC)
+if(CONFIG_ENA_INTERFACE_INPUT_CUSTOM)
-    list(APPEND priv_requires "display-m5-st7735s" "rtc-m5-bm8563" "imu-m5-mpu6886" "pmu-m5-axp192")
+     list(APPEND src_list "custom-input/custom-input.c")
-elseif(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
+     list(APPEND include_list "custom-input")
-    list(APPEND priv_requires "display-m5-st7789" "rtc-m5-bm8563" "imu-m5-mpu6886" "pmu-m5-axp192")
+elseif(CONFIG_ENA_INTERFACE_M5STICKC OR CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
+    list(APPEND src_list "m5-input/m5-input.c" "m5-mpu6886/mpu6886.c")
+    list(APPEND include_list "m5-input" "m5-mpu6886")
 elseif(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
-    list(APPEND priv_requires "display-ttgo-st7735" "imu-ttgo-lsm9ds1")
+    list(APPEND src_list "ttgo-input/ttgo-input.c" "ttgo-lsm9ds1/lsm9ds1.c")
+    list(APPEND include_list "ttgo-input" "ttgo-lsm9ds1")
 else()
-    list(APPEND priv_requires "display-custom-ssd1306" "rtc-custom-ds3231") # uncomment for custom device with SSD1306 und DS3231
+    list(APPEND src_list "dummy.c")
-#    list(APPEND priv_requires "display-m5-st7735s" "rtc-m5-bm8563" "imu-m5-mpu6886" "pmu-m5-axp192") # uncomment for M5StickC
-#    list(APPEND priv_requires "display-m5-st7789" "rtc-m5-bm8563" "imu-m5-mpu6886" "pmu-m5-axp192") # uncomment for M5StickC PLUS
-#    list(APPEND priv_requires "display-ttgo-st7735" "imu-ttgo-lsm9ds1") # uncomment for TTGO T-Wristband
 endif()
 
 idf_component_register(
     SRCS 
-        "interface.c"
+        ${src_list}
-        "interface-main.c"
+    INCLUDE_DIRS
-        "interface-data.c"
+        ${include_list}
-        "interface-datetime.c"
+    PRIV_REQUIRES 
-        "interface-debug.c"
+        "ena"
-        "interface-info.c"
+        "ena-eke-proxy"
-        "interface-input.c"
+        "display"
-        "interface-label.c"
+        "rtc"
-        "interface-report.c"
+        "wifi-controller"
-        "interface-settings.c"
+        "i2c-main"
-        "interface-wifi.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES ${priv_requires}
 )

components/interface/Kconfig.projbuild

@@ -5,17 +5,56 @@ menu "ENA Interface"
 		int  "Seconds after display turns off on inactivity"
 		default 15
 
-	config ENA_INTERFACE_DEBUG
-		bool "Adds a debug interface for additional information for device"
-		default false
-
 	choice ENA_INTERFACE_DEVICE
 		prompt "Choose device"
 		default ENA_INTERFACE_CUSTOM
 	
 		config ENA_INTERFACE_CUSTOM
 			bool "Custom"
-	
+
+				choice ENA_INTERFACE_CUSTOM_DISPLAY
+					depends on 	ENA_INTERFACE_CUSTOM
+					prompt "Choose custom display"
+					default ENA_INTERFACE_DISPLAY_SSD1306
+					config ENA_INTERFACE_DISPLAY_SSD1306
+						bool "SSD1306"
+					config ENA_INTERFACE_DISPLAY_NONE
+						bool "none"
+				endchoice 
+
+				choice ENA_INTERFACE_CUSTOM_RTC
+					depends on 	ENA_INTERFACE_CUSTOM
+						prompt "Choose custom rtc"
+						default ENA_INTERFACE_RTC_DS3231
+						config ENA_INTERFACE_RTC_DS3231
+							bool "DS3231"
+						config ENA_INTERFACE_RTC_NONE
+							bool "none"
+				endchoice 
+
+				choice ENA_INTERFACE_CUSTOM_INPUT
+					depends on 	ENA_INTERFACE_CUSTOM
+						prompt "Choose custom input"
+						default ENA_INTERFACE_INPUT_CUSTOM
+						config ENA_INTERFACE_INPUT_CUSTOM
+							bool "7-Button input"
+						config ENA_INTERFACE_INPUT_NONE
+							bool "none"
+				endchoice 
+
+				menu "Custom I²C"
+					depends on ENA_INTERFACE_CUSTOM
+
+					config I2C_SDA_PIN
+						int "I²C sda pin"
+						default 21
+				
+					config I2C_SCL_PIN
+						int "I²C scl pin"
+						default 22
+
+				endmenu
+
 		config ENA_INTERFACE_M5STICKC
 			bool "M5StickC"
 	

components/interface/custom-input/custom-input.c

@@ -97,7 +97,7 @@ void custom_input_task(void *pvParameter)
     }
 }
 
-void custom_input_start(void)
+void interface_input_start(void)
 {
     gpio_config_t io_conf;
 

components/interface/custom-input/custom-input.h

@@ -28,11 +28,4 @@
 #define BUTTON_DWN GPIO_NUM_14
 #define BUTTON_UP GPIO_NUM_12
 
-/**
- * @brief     
- * 
- * 
- */
-void custom_input_start(void);
-
 #endif

components/interface/dummy.c

@@ -0,0 +1,19 @@
+// Copyright 2020 Lukas Haubaum
+//
+// Licensed under the GNU Affero General Public License, Version 3;
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     https://www.gnu.org/licenses/agpl-3.0.html
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#include <stdio.h>
+#include "interface.h"
+
+void interface_input_start(void)
+{
+}

components/interface/interface-data.c

@@ -109,11 +109,7 @@ void interface_data_lft(void)
 
 void interface_data_rht(void)
 {
-#if defined(CONFIG_ENA_INTERFACE_DEBUG)
-    interface_debug_start();
-#else
     interface_info_start();
-#endif
 }
 
 void interface_data_mid(void)

components/interface/interface-debug.c

@@ -1,168 +0,0 @@
-// Copyright 2020 Lukas Haubaum
-//
-// Licensed under the GNU Affero General Public License, Version 3;
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-
-//     https://www.gnu.org/licenses/agpl-3.0.html
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-#include <string.h>
-#include <time.h>
-#include <sys/time.h>
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "esp_log.h"
-#include "driver/gpio.h"
-
-#include "display.h"
-#include "display-gfx.h"
-
-#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
-#include "mpu6886.h"
-#include "axp192.h"
-#endif
-
-#if defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
-#include "lsm9ds1.h"
-#endif
-
-#include "interface.h"
-
-static bool runTask = true;
-static TaskHandle_t debugTaskHandle = NULL;
-
-void interface_debug_set(void)
-{
-  runTask = false;
-  vTaskDelay(100 / portTICK_PERIOD_MS);
-  vTaskSuspend(debugTaskHandle);
-  interface_main_start();
-}
-
-void interface_debug_rst(void)
-{
-}
-
-void interface_debug_lft(void)
-{
-  runTask = false;
-  vTaskDelay(100 / portTICK_PERIOD_MS);
-  vTaskSuspend(debugTaskHandle);
-  interface_data_start();
-}
-
-void interface_debug_rht(void)
-{
-  runTask = false;
-  vTaskDelay(100 / portTICK_PERIOD_MS);
-  vTaskSuspend(debugTaskHandle);
-  interface_info_start();
-}
-
-void interface_debug_mid(void)
-{
-}
-
-void interface_debug_up(void)
-{
-}
-
-void interface_debug_dwn(void)
-{
-}
-
-void interface_debug_task(void *pvParameter)
-{
-
-#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS) || defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
-  float ax = 0;
-  float ay = 0;
-  float az = 0;
-
-  float gx = 0;
-  float gy = 0;
-  float gz = 0;
-#endif
-
-  while (1)
-  {
-
-    if (!interface_is_idle() && runTask)
-    {
-#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
-      mpu6886_get_accel_data(&ax, &ay, &az);
-      mpu6886_get_gyro_data(&gx, &gy, &gz);
-
-#endif
-
-#if defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
-      lsm9ds1_get_accel_data(&ax, &ay, &az);
-      lsm9ds1_get_gyro_data(&gx, &gy, &gz);
-#endif
-
-#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS) || defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
-      char data_chars[32];
-      sprintf(data_chars, "acc x:%3.2f", ax);
-      display_text_line(data_chars, 1, false);
-      sprintf(data_chars, "acc y:%3.2f", ay);
-      display_text_line(data_chars, 2, false);
-      sprintf(data_chars, "acc z:%3.2f", az);
-      display_text_line(data_chars, 3, false);
-      sprintf(data_chars, "gyr x:%3.2f", gx);
-      display_text_line(data_chars, 4, false);
-      sprintf(data_chars, "gyr y:%3.2f", gy);
-      display_text_line(data_chars, 5, false);
-      sprintf(data_chars, "gyr z:%3.2f", gz);
-      display_text_line(data_chars, 6, false);
-
-#endif
-
-#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
-      float bat_v = axp192_get_bat_voltage();
-      sprintf(data_chars, "Battery: %.2f V", bat_v);
-      display_text_line(data_chars, 7, false);
-
-#endif
-    }
-
-    vTaskDelay(10 / portTICK_PERIOD_MS);
-  }
-}
-
-void interface_debug_start(void)
-{
-
-#if defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
-    lsm9ds1_start();
-#endif
-
-  interface_register_command_callback(INTERFACE_COMMAND_RST, &interface_debug_rst);
-  interface_register_command_callback(INTERFACE_COMMAND_SET, &interface_debug_set);
-  interface_register_command_callback(INTERFACE_COMMAND_LFT, &interface_debug_lft);
-  interface_register_command_callback(INTERFACE_COMMAND_RHT, &interface_debug_rht);
-  interface_register_command_callback(INTERFACE_COMMAND_MID, &interface_debug_mid);
-  interface_register_command_callback(INTERFACE_COMMAND_UP, &interface_debug_up);
-  interface_register_command_callback(INTERFACE_COMMAND_DWN, &interface_debug_dwn);
-  interface_register_command_callback(INTERFACE_COMMAND_RST_LONG, NULL);
-  interface_register_command_callback(INTERFACE_COMMAND_SET_LONG, NULL);
-
-  interface_set_display_function(NULL);
-
-  display_menu_headline(interface_get_label_text(&interface_text_headline_debug), true, 0);
-
-  if (debugTaskHandle == NULL)
-  {
-    xTaskCreate(&interface_debug_task, "interface_debug_task", 4096 * 2, NULL, 5, &debugTaskHandle);
-  }
-  else
-  {
-    vTaskResume(debugTaskHandle);
-  }
-
-  runTask = true;
-}

components/interface/interface-info.c

@@ -24,9 +24,20 @@
 
 #include "ena-storage.h"
 #include "ena-exposure.h"
+#include "ena-bluetooth-scan.h"
 
 #include "interface.h"
 
+typedef enum
+{
+    INTERFACE_INFO_STATUS_EXPOSURE = 0,
+    INTERFACE_INFO_STATUS_BEACONS,
+    INTERFACE_INFO_STATUS_SCAN,
+    INTERFACE_INFO_STATUS_SYSTEM
+} info_status_e;
+
+static int current_info_status = INTERFACE_INFO_STATUS_EXPOSURE;
+
 void interface_info_set(void)
 {
     interface_main_start();
@@ -38,11 +49,7 @@ void interface_info_rst(void)
 
 void interface_info_lft(void)
 {
-#if defined(CONFIG_ENA_INTERFACE_DEBUG)
-    interface_debug_start();
-#else
     interface_data_start();
-#endif
 }
 
 void interface_info_rht(void)
@@ -56,10 +63,20 @@ void interface_info_mid(void)
 
 void interface_info_up(void)
 {
+    current_info_status--;
+    if (current_info_status < INTERFACE_INFO_STATUS_EXPOSURE)
+    {
+        current_info_status = INTERFACE_INFO_STATUS_SYSTEM;
+    }
 }
 
 void interface_info_dwn(void)
 {
+    current_info_status++;
+    if (current_info_status > INTERFACE_INFO_STATUS_SYSTEM)
+    {
+        current_info_status = INTERFACE_INFO_STATUS_EXPOSURE;
+    }
 }
 
 int interface_info_num_offset(int num)
@@ -80,50 +97,84 @@ int interface_info_num_offset(int num)
 
 void interface_info_display(void)
 {
-    ena_exposure_summary_t *current_exposure_summary = ena_exposure_current_summary();
+    display_clear();
-
+    char char_buffer[64];
-    char data_chars[16];
     display_menu_headline(interface_get_label_text(&interface_text_headline_info), true, 0);
 
-    display_text_line_column(interface_get_label_text(&interface_text_info_num_keys), 2, 1, false);
+    display_data(display_gfx_arrow_up, 8, 1, 60, false);
 
-    int num = ena_storage_beacons_count();
+    if (current_info_status == INTERFACE_INFO_STATUS_EXPOSURE)
-    sprintf(data_chars, "%u", num);
+    {
-    display_text_line_column(data_chars, 2, interface_info_num_offset(num), false);
+        ena_exposure_summary_t *current_exposure_summary = ena_exposure_current_summary();
-
+
-    display_text_line_column(interface_get_label_text(&interface_text_info_last_keys), 3, 1, false);
+        display_text_line_column(interface_get_label_text(&interface_text_info_exp_days), 3, 1, false);
-
+        int last = current_exposure_summary->days_since_last_exposure;
-    time_t current_timstamp;
+        if (last >= 0)
-    time(&current_timstamp);
+        {
-
+            sprintf(char_buffer, "%d", last);
-    int min = ena_expore_check_find_min((uint32_t)current_timstamp - 60 * 30);
+            display_text_line_column(char_buffer, 3, interface_info_num_offset(last), false);
-    int last30 = num - min;
+        }
-
+
-    if (last30 >= 0)
+        display_text_line_column(interface_get_label_text(&interface_text_info_exp_num), 4, 1, false);
+        sprintf(char_buffer, "%d", current_exposure_summary->num_exposures);
+        display_text_line_column(char_buffer, 4, interface_info_num_offset(current_exposure_summary->num_exposures), false);
+
+        display_text_line_column(interface_get_label_text(&interface_text_info_exp_max), 5, 1, false);
+        sprintf(char_buffer, "%d", current_exposure_summary->max_risk_score);
+        display_text_line_column(char_buffer, 5, interface_info_num_offset(current_exposure_summary->max_risk_score), false);
+
+        display_text_line_column(interface_get_label_text(&interface_text_info_exp_sum), 6, 1, false);
+        sprintf(char_buffer, "%d", current_exposure_summary->risk_score_sum);
+        display_text_line_column(char_buffer, 6, interface_info_num_offset(current_exposure_summary->risk_score_sum), false);
+    }
+    else if (current_info_status == INTERFACE_INFO_STATUS_BEACONS)
+    {
+        display_text_line_column(interface_get_label_text(&interface_text_info_num_keys), 3, 1, false);
+
+        int num = ena_storage_beacons_count();
+        sprintf(char_buffer, "%u", num);
+        display_text_line_column(char_buffer, 3, interface_info_num_offset(num), false);
+
+        display_text_line_column(interface_get_label_text(&interface_text_info_last_keys), 4, 1, false);
+
+        time_t current_timstamp;
+        time(&current_timstamp);
+
+        int min = ena_expore_check_find_min((uint32_t)current_timstamp - 60 * 30);
+        int last30 = num - min;
+
+        if (last30 >= 0)
+        {
+            sprintf(char_buffer, "%d", last30);
+            display_text_line_column(char_buffer, 4, interface_info_num_offset(last30), false);
+        }
+    }
+    else if (current_info_status == INTERFACE_INFO_STATUS_SCAN)
+    {
+        int current_scan = ena_bluetooth_scan_get_last_num();
+
+        switch (ena_bluetooth_scan_get_status())
+        {
+        case ENA_SCAN_STATUS_SCANNING:
+            display_text_line_column(interface_get_label_text(&interface_text_info_scan_status_scanning), 3, 1, false);
+            break;
+        case ENA_SCAN_STATUS_NOT_SCANNING:
+            display_text_line_column(interface_get_label_text(&interface_text_info_scan_status_notscanning), 3, 1, false);
+            break;
+        case ENA_SCAN_STATUS_WAITING:
+            display_text_line_column(interface_get_label_text(&interface_text_info_scan_status_waiting), 3, 1, false);
+            break;
+        }
+
+        display_text_line_column(interface_get_label_text(&interface_text_info_scan_last), 5, 1, false);
+        sprintf(char_buffer, "%d", current_scan);
+        display_text_line_column(char_buffer, 5, interface_info_num_offset(current_scan), false);
+    }
+    else if (current_info_status == INTERFACE_INFO_STATUS_SYSTEM)
     {
-        sprintf(data_chars, "%d", last30);
-        display_text_line_column(data_chars, 3, interface_info_num_offset(last30), false);
     }
 
-    display_text_line_column(interface_get_label_text(&interface_text_info_exp_days), 4, 1, false);
+    display_data(display_gfx_arrow_down, 8, 7, 60, false);
-    int last = current_exposure_summary->days_since_last_exposure;
-    if (last >= 0)
-    {
-        sprintf(data_chars, "%d", last);
-        display_text_line_column(data_chars, 4, interface_info_num_offset(last), false);
-    }
-
-    display_text_line_column(interface_get_label_text(&interface_text_info_exp_num), 5, 1, false);
-    sprintf(data_chars, "%d", current_exposure_summary->num_exposures);
-    display_text_line_column(data_chars, 5, interface_info_num_offset(current_exposure_summary->num_exposures), false);
-
-    display_text_line_column(interface_get_label_text(&interface_text_info_exp_max), 6, 1, false);
-    sprintf(data_chars, "%d", current_exposure_summary->max_risk_score);
-    display_text_line_column(data_chars, 6, interface_info_num_offset(current_exposure_summary->max_risk_score), false);
-
-    display_text_line_column(interface_get_label_text(&interface_text_info_exp_sum), 7, 1, false);
-    sprintf(data_chars, "%d", current_exposure_summary->risk_score_sum);
-    display_text_line_column(data_chars, 7, interface_info_num_offset(current_exposure_summary->risk_score_sum), false);
 }
 
 void interface_info_start(void)

components/interface/interface-label.c

@@ -58,6 +58,11 @@ void interface_init_label(void)
     interface_text_info_exp_max.text[EN] = "Score:";
     interface_text_info_exp_sum.text[EN] = "Scores:";
 
+    interface_text_info_scan_status_scanning.text[EN] = "Scanning...";
+    interface_text_info_scan_status_notscanning.text[EN] = "Not scanning.";
+    interface_text_info_scan_status_waiting.text[EN] = "Waiting for scan";
+    interface_text_info_scan_last.text[EN] = "Last scan:";
+
     interface_text_report_pending.text[EN] = "Uploading...";
     interface_text_report_success.text[EN] = "Upload succeed!";
     interface_text_report_fail.text[EN] = "Upload failed!";
@@ -124,6 +129,11 @@ void interface_init_label(void)
     interface_text_info_exp_max.text[DE] = "Score:";
     interface_text_info_exp_sum.text[DE] = "Scores:";
 
+    interface_text_info_scan_status_scanning.text[DE] = "Scannen...";
+    interface_text_info_scan_status_notscanning.text[DE] = "Kein Scan.";
+    interface_text_info_scan_status_waiting.text[DE] = "Warten auf Scan.";
+    interface_text_info_scan_last.text[DE] = "letz. Scan:";
+
     interface_text_report_pending.text[DE] = "Hochladen...";
     interface_text_report_success.text[DE] = "Erfolgreich!";
     interface_text_report_fail.text[DE] = "Fehlgeschlagen!";

components/interface/interface.c

@@ -145,6 +145,8 @@ void interface_start(void)
     display_clear();
 
     xTaskCreate(&interface_display_task, "interface_display_task", 4096, NULL, 5, NULL);
+    
+    interface_input_start();
 }
 
 void interface_flipped(bool flipped)

components/interface/interface.h

@@ -93,6 +93,10 @@ interface_label_t interface_text_info_exp_days;
 interface_label_t interface_text_info_exp_num;
 interface_label_t interface_text_info_exp_max;
 interface_label_t interface_text_info_exp_sum;
+interface_label_t interface_text_info_scan_status_scanning;
+interface_label_t interface_text_info_scan_status_notscanning;
+interface_label_t interface_text_info_scan_status_waiting;
+interface_label_t interface_text_info_scan_last;
 
 interface_label_t interface_text_report_pending;
 interface_label_t interface_text_report_success;
@@ -127,6 +131,16 @@ typedef void (*interface_display_function)(void);
  */
 typedef void (*interface_text_callback)(char *text, uint8_t cursor);
 
+
+/**
+ * @brief start input routine
+ * 
+ * MUST BE DEFINED DEVICE SPECIFIC
+ * 
+ */
+void interface_input_start(void);
+
+
 /**
  * @brief       is interface in idle mode
  * 
@@ -268,11 +282,6 @@ void interface_settings_start(void);
  */
 void interface_info_start(void);
 
-/**
- * @brief       start debug interface
- */
-void interface_debug_start(void);
-
 /**
  * @brief       start interface for input
  * 

components/interface/m5-input/m5-input.c

@@ -138,7 +138,7 @@ void m5_input_task(void *pvParameter)
     }
 }
 
-void m5_input_start(void)
+void interface_input_start(void)
 {
     gpio_config_t io_conf;
 

components/interface/m5-input/m5-input.h

@@ -23,11 +23,4 @@
 #define BUTTON_RST GPIO_NUM_37
 #define BUTTON_SET GPIO_NUM_39
 
-/**
- * @brief     
- * 
- * 
- */
-void m5_input_start(void);
-
 #endif

components/interface/ttgo-input/ttgo-input.c

@@ -37,7 +37,7 @@ void ttgo_input_task(void *pvParameter)
     }
 }
 
-void ttgo_input_start(void)
+void interface_input_start(void)
 {
     lsm9ds1_start();
     xTaskCreate(&ttgo_input_task, "ttgo_input_task", 4096, NULL, 5, NULL);

components/interface/ttgo-input/ttgo-input.h

@@ -20,11 +20,4 @@
 #ifndef _ttgo_input_H_
 #define _ttgo_input_H_
 
-/**
- * @brief     
- * 
- * 
- */
-void ttgo_input_start(void);
-
 #endif

components/interface/ttgo-lsm9ds1/lsm9ds1.c

@@ -55,6 +55,11 @@ void lsm9ds1_i2c_write_bytes(uint8_t driver_addr, uint8_t start_addr, uint8_t nu
 
 int lsm9ds1_start(void)
 {
+    if (!i2c_is_initialized())
+    {
+        i2c_main_init();
+    }
+
     unsigned char regdata;
     // init ACC
     regdata = 0x38;
@@ -77,7 +82,7 @@ int lsm9ds1_start(void)
 
     aRes = 16.0 / 32768.0;
     gRes = 500.0 / 32768.0;
-    return 0; 
+    return 0;
 }
 
 void lsm9ds1_get_accel_adc(int16_t *ax, int16_t *ay, int16_t *az)

components/pmu-m5-axp192/CMakeLists.txt

@@ -1,7 +0,0 @@
-idf_component_register(
-    SRCS 
-        "axp192.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES 
-        i2c-main
-)

components/rtc-custom-ds3231/CMakeLists.txt

@@ -1,8 +0,0 @@
-idf_component_register(
-    SRCS 
-        "ds3231.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES
-        rtc
-        i2c-main
-)

components/rtc-m5-bm8563/CMakeLists.txt

@@ -1,8 +0,0 @@
-idf_component_register(
-    SRCS 
-        "bm8563.c"
-    INCLUDE_DIRS "."
-    PRIV_REQUIRES
-        rtc 
-        i2c-main
-)

components/rtc/CMakeLists.txt

@@ -1,4 +1,20 @@
+set(include_list ".")
+
+if(CONFIG_ENA_INTERFACE_RTC_DS3231)
+    set(src_list "custom-ds3231/ds3231.c")
+    list(APPEND include_list "custom-ds3231")
+elseif(CONFIG_ENA_INTERFACE_M5STICKC OR CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
+    set(src_list "m5-bm8563/bm8563.c")
+    list(APPEND include_list "m5-bm8563")
+else()
+    set(src_list "dummy.c")
+endif()
+
 idf_component_register(
     SRCS 
-    INCLUDE_DIRS "."
+        ${src_list}
+    INCLUDE_DIRS
+        ${include_list}
+    PRIV_REQUIRES
+        "i2c-main"
 )

components/rtc/dummy.c

@@ -0,0 +1,23 @@
+// Copyright 2020 Lukas Haubaum
+//
+// Licensed under the GNU Affero General Public License, Version 3;
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     https://www.gnu.org/licenses/agpl-3.0.html
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#include <string.h>
+#include "rtc.h"
+
+void rtc_get_time(struct tm *time)
+{
+}
+
+void rtc_set_time(struct tm *time)
+{
+}

main/main.c

@@ -33,18 +33,6 @@
 
 #include "sdkconfig.h"
 
-#ifdef CONFIG_ENA_INTERFACE_CUSTOM
-#include "custom-input.h"
-#endif
-
-#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS) 
-#include "m5-input.h"
-#endif
-
-#ifdef CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND
-#include "ttgo-input.h"
-#endif
-
 void time_sync_notification_cb(struct timeval *tv)
 {
     time_t time = (time_t)tv->tv_sec;
@@ -92,19 +80,6 @@ void app_main(void)
     // start with main interface
     interface_main_start();
 
-    // start input
-#if defined(CONFIG_ENA_INTERFACE_CUSTOM)
-    custom_input_start();
-#endif
-
-#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS) 
-    m5_input_start();
-#endif
-
-#if defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
-    ttgo_input_start();
-#endif
-
     wifi_controller_reconnect(NULL);
 
     while (1)