mirror of
https://github.com/Lurkars/esp-ena.git
synced 2024-11-22 10:06:11 +01:00
small interface improvements, renaming of device specific modules, starting with TTGO T-Wristband support
This commit is contained in:
Lurkars
parent
48528e027e
commit
17ebf801f1
30
README.md
30
README.md
@ -180,39 +180,51 @@ General module for set/get time from RTC.
|
||||
|
||||
Just start I²C driver.
|
||||
|
||||
### interface-input-buttons
|
||||
### interface-custom-input
|
||||
|
||||
Interface with 7 button input.
|
||||
|
||||
### interface-input-m5
|
||||
### interface-m5-input
|
||||
|
||||
Interface with input for M5StickC (PLUS) with 2 button input and accelerometer as axis input.
|
||||
|
||||
### rtc-ds3231
|
||||
### interface-ttgo-input
|
||||
|
||||
Interface with input for TTGO T-Wristband with 1 button input and accelerometer as axis input.
|
||||
|
||||
### rtc-custom-ds3231
|
||||
|
||||
I²C driver for a DS3231 RTC, implementation of [rtc](#-rtc) module.
|
||||
|
||||
### rtc-bm8563
|
||||
### rtc-m5-bm8563
|
||||
|
||||
I²C driver for BM8563 of M5StickC (PLUS), implementation of [rtc](#-rtc) module.
|
||||
|
||||
### display-ssd1306
|
||||
### display-custom-ssd1306
|
||||
|
||||
I²C driver for a SSD1306 display, implementation of [display](#-display) module.
|
||||
|
||||
### display-st7735s
|
||||
### display-m5-st7735s
|
||||
|
||||
SPI driver for a ST7735s display of M5StickC, implementation of [display](#-display) module.
|
||||
|
||||
### display-st7789
|
||||
### display-m5-st7789
|
||||
|
||||
SPI driver for a ST7789 display of M5StickC PLUS, implementation of [display](#-display) module
|
||||
|
||||
### imu-mpu6886
|
||||
### display-ttgo-st7735
|
||||
|
||||
SPI driver for a ST7735 display of TTGO T-Wristband, implementation of [display](#-display) module.
|
||||
|
||||
### imu-m5-mpu6886
|
||||
|
||||
I²C driver for MPU6886 6-Axis IMU of M5StickC (PLUS).
|
||||
|
||||
### pmu-axp192
|
||||
### imu-ttgo-lsm9ds1 \[in development\]
|
||||
|
||||
I²C driver for LSM9DS1 6-Axis IMU of TTGO T-Wristband.
|
||||
|
||||
### pmu-m5-axp192
|
||||
|
||||
I²C driver for AXP192 PMU of M5StickC (PLUS).
|
||||
|
||||
|
||||
@ -5,5 +5,5 @@ idf_component_register(
|
||||
PRIV_REQUIRES
|
||||
"display"
|
||||
"spi_flash"
|
||||
"pmu-axp192"
|
||||
"pmu-m5-axp192"
|
||||
)
|
||||
@ -5,5 +5,5 @@ idf_component_register(
|
||||
PRIV_REQUIRES
|
||||
"display"
|
||||
"spi_flash"
|
||||
"pmu-axp192"
|
||||
"pmu-m5-axp192"
|
||||
)
|
||||
8
components/display-ttgo-st7735/CMakeLists.txt
Normal file
8
components/display-ttgo-st7735/CMakeLists.txt
Normal file
@ -0,0 +1,8 @@
|
||||
idf_component_register(
|
||||
SRCS
|
||||
"st7735.c"
|
||||
INCLUDE_DIRS "."
|
||||
PRIV_REQUIRES
|
||||
"display"
|
||||
"spi_flash"
|
||||
)
|
||||
346
components/display-ttgo-st7735/st7735.c
Normal file
346
components/display-ttgo-st7735/st7735.c
Normal file
@ -0,0 +1,346 @@
|
||||
// Copyright 2020 Lukas Haubaum
|
||||
//
|
||||
// Licensed under the GNU Affero General Public License, Version 3;
|
||||
// you may not use this file except in compliance with the License.
|
||||
// You may obtain a copy of the License at
|
||||
|
||||
// https://www.gnu.org/licenses/agpl-3.0.html
|
||||
//
|
||||
// Unless required by applicable law or agreed to in writing, software
|
||||
// distributed under the License is distributed on an "AS IS" BASIS,
|
||||
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
// See the License for the specific language governing permissions and
|
||||
// limitations under the License.
|
||||
#include <string.h>
|
||||
#include <math.h>
|
||||
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
|
||||
#include <driver/spi_master.h>
|
||||
#include <driver/gpio.h>
|
||||
#include "esp_log.h"
|
||||
|
||||
#include "display.h"
|
||||
#include "display-gfx.h"
|
||||
|
||||
#include "st7735.h"
|
||||
|
||||
static spi_device_handle_t st7735s_handle;
|
||||
|
||||
bool spi_master_write(uint8_t *data, size_t len, uint8_t dc)
|
||||
{
|
||||
spi_transaction_t spi_trans;
|
||||
esp_err_t ret;
|
||||
|
||||
gpio_set_level(TTGO_T_WRISTBAND_DC_GPIO, dc);
|
||||
|
||||
memset(&spi_trans, 0, sizeof(spi_transaction_t));
|
||||
spi_trans.length = len * 8;
|
||||
spi_trans.tx_buffer = data;
|
||||
ret = spi_device_transmit(st7735s_handle, &spi_trans);
|
||||
assert(ret == ESP_OK);
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool spi_master_write_command(uint8_t cmd)
|
||||
{
|
||||
return spi_master_write(&cmd, 1, SPI_COMMAND_MODE);
|
||||
}
|
||||
|
||||
bool spi_master_write_data_byte(uint8_t data)
|
||||
{
|
||||
return spi_master_write(&data, 1, SPI_DATA_MODE);
|
||||
}
|
||||
|
||||
bool spi_master_write_data(uint8_t *data, size_t len)
|
||||
{
|
||||
return spi_master_write(data, len, SPI_DATA_MODE);
|
||||
}
|
||||
|
||||
bool spi_master_write_addr(uint16_t addr1, uint16_t addr2)
|
||||
{
|
||||
uint8_t data[4];
|
||||
data[0] = (addr1 >> 8) & 0xFF;
|
||||
data[1] = addr1 & 0xFF;
|
||||
data[2] = (addr2 >> 8) & 0xFF;
|
||||
data[3] = addr2 & 0xFF;
|
||||
|
||||
return spi_master_write_data(data, 4);
|
||||
}
|
||||
|
||||
bool spi_master_write_color(uint16_t color, size_t size)
|
||||
{
|
||||
uint8_t data[size * 2];
|
||||
int index = 0;
|
||||
|
||||
uint8_t msbColor = (color >> 8) & 0xFF;
|
||||
uint8_t lsbColor = color & 0xFF;
|
||||
|
||||
for (int i = 0; i < size; i++)
|
||||
{
|
||||
data[index++] = msbColor;
|
||||
data[index++] = lsbColor;
|
||||
}
|
||||
return spi_master_write_data(data, size * 2);
|
||||
}
|
||||
|
||||
bool spi_master_write_colors(uint16_t *colors, size_t size)
|
||||
{
|
||||
uint8_t data[size * 2];
|
||||
int index = 0;
|
||||
for (int i = 0; i < size; i++)
|
||||
{
|
||||
data[index++] = (colors[i] >> 8) & 0xFF;
|
||||
data[index++] = colors[i] & 0xFF;
|
||||
}
|
||||
return spi_master_write_data(data, size * 2);
|
||||
}
|
||||
|
||||
void display_start(void)
|
||||
{
|
||||
esp_err_t ret;
|
||||
|
||||
gpio_set_direction(TTGO_T_WRISTBAND_CS_GPIO, GPIO_MODE_OUTPUT);
|
||||
gpio_set_level(TTGO_T_WRISTBAND_CS_GPIO, 0);
|
||||
|
||||
gpio_set_direction(TTGO_T_WRISTBAND_DC_GPIO, GPIO_MODE_OUTPUT);
|
||||
gpio_set_level(TTGO_T_WRISTBAND_DC_GPIO, 0);
|
||||
|
||||
gpio_set_direction(TTGO_T_WRISTBAND_RESET_GPIO, GPIO_MODE_OUTPUT);
|
||||
gpio_set_level(TTGO_T_WRISTBAND_RESET_GPIO, 0);
|
||||
vTaskDelay(100 / portTICK_PERIOD_MS);
|
||||
gpio_set_level(TTGO_T_WRISTBAND_RESET_GPIO, 1);
|
||||
|
||||
spi_bus_config_t buscfg = {
|
||||
.sclk_io_num = TTGO_T_WRISTBAND_SCLK_GPIO,
|
||||
.mosi_io_num = TTGO_T_WRISTBAND_MOSI_GPIO,
|
||||
.miso_io_num = -1,
|
||||
.quadwp_io_num = -1,
|
||||
.quadhd_io_num = -1};
|
||||
|
||||
ret = spi_bus_initialize(HSPI_HOST, &buscfg, 1);
|
||||
assert(ret == ESP_OK);
|
||||
|
||||
spi_device_interface_config_t devcfg = {
|
||||
.clock_speed_hz = SPI_MASTER_FREQ_20M,
|
||||
.spics_io_num = TTGO_T_WRISTBAND_CS_GPIO,
|
||||
.queue_size = 7,
|
||||
.flags = SPI_DEVICE_NO_DUMMY,
|
||||
};
|
||||
|
||||
ret = spi_bus_add_device(HSPI_HOST, &devcfg, &st7735s_handle);
|
||||
assert(ret == ESP_OK);
|
||||
|
||||
spi_master_write_command(0x01); //Software Reset
|
||||
vTaskDelay(150 / portTICK_PERIOD_MS);
|
||||
|
||||
spi_master_write_command(0x11); //Sleep Out
|
||||
vTaskDelay(255 / portTICK_PERIOD_MS);
|
||||
|
||||
spi_master_write_command(0xB1); //Frame Rate Control (In normal mode/ Full colors)
|
||||
spi_master_write_data_byte(0x01);
|
||||
spi_master_write_data_byte(0x2C);
|
||||
spi_master_write_data_byte(0x2D);
|
||||
|
||||
spi_master_write_command(0xB2); //Frame Rate Control (In Idle mode/ 8-colors)
|
||||
spi_master_write_data_byte(0x01);
|
||||
spi_master_write_data_byte(0x2C);
|
||||
spi_master_write_data_byte(0x2D);
|
||||
|
||||
spi_master_write_command(0xB3); //Frame Rate Control (In Partial mode/ full colors)
|
||||
spi_master_write_data_byte(0x01);
|
||||
spi_master_write_data_byte(0x2C);
|
||||
spi_master_write_data_byte(0x2D);
|
||||
spi_master_write_data_byte(0x01);
|
||||
spi_master_write_data_byte(0x2C);
|
||||
spi_master_write_data_byte(0x2D);
|
||||
|
||||
spi_master_write_command(0xB4); //Display Inversion Control
|
||||
spi_master_write_data_byte(0x07);
|
||||
|
||||
spi_master_write_command(0xC0); //Power Control 1
|
||||
spi_master_write_data_byte(0xA2);
|
||||
spi_master_write_data_byte(0x02);
|
||||
spi_master_write_data_byte(0x84);
|
||||
|
||||
spi_master_write_command(0xC1); //Power Control 2
|
||||
spi_master_write_data_byte(0xC5);
|
||||
|
||||
spi_master_write_command(0xC2); //Power Control 3 (in Normal mode/ Full colors)
|
||||
spi_master_write_data_byte(0x0A);
|
||||
spi_master_write_data_byte(0x00);
|
||||
|
||||
spi_master_write_command(0xC3); //Power Control 4 (in Idle mode/ 8-colors)
|
||||
spi_master_write_data_byte(0x8A);
|
||||
spi_master_write_data_byte(0x2A);
|
||||
|
||||
spi_master_write_command(0xC4); //Power Control 5 (in Partial mode/ full-colors)
|
||||
spi_master_write_data_byte(0x8A);
|
||||
spi_master_write_data_byte(0xEE);
|
||||
|
||||
spi_master_write_command(0xC5); //VCOM Control 1
|
||||
spi_master_write_data_byte(0x0E);
|
||||
|
||||
spi_master_write_command(0x20); //Display Inversion Off
|
||||
|
||||
spi_master_write_command(0x36); //Memory Data Access Control
|
||||
spi_master_write_data_byte(TTGO_T_WRISTBAND_LANDSCAPE); // landscape + RGB color
|
||||
|
||||
spi_master_write_command(0x3A); //Interface Pixel Format
|
||||
spi_master_write_data_byte(0x05); //16-bit/pixel 65K-Colors(RGB 5-6-5-bit Input)
|
||||
|
||||
spi_master_write_command(0x2A); //Column Address Set
|
||||
spi_master_write_data_byte(0x00);
|
||||
spi_master_write_data_byte(0x02);
|
||||
spi_master_write_data_byte(0x00);
|
||||
spi_master_write_data_byte(0x81);
|
||||
|
||||
spi_master_write_command(0x2B); //Row Address Set
|
||||
spi_master_write_data_byte(0x00);
|
||||
spi_master_write_data_byte(0x01);
|
||||
spi_master_write_data_byte(0x00);
|
||||
spi_master_write_data_byte(0xA0);
|
||||
|
||||
spi_master_write_command(0x21); //Display Inversion On
|
||||
|
||||
spi_master_write_command(0xE0); //Gamma (‘+’polarity) Correction Characteristics Setting
|
||||
spi_master_write_data_byte(0x02);
|
||||
spi_master_write_data_byte(0x1C);
|
||||
spi_master_write_data_byte(0x07);
|
||||
spi_master_write_data_byte(0x12);
|
||||
spi_master_write_data_byte(0x37);
|
||||
spi_master_write_data_byte(0x32);
|
||||
spi_master_write_data_byte(0x29);
|
||||
spi_master_write_data_byte(0x2D);
|
||||
spi_master_write_data_byte(0x29);
|
||||
spi_master_write_data_byte(0x25);
|
||||
spi_master_write_data_byte(0x2B);
|
||||
spi_master_write_data_byte(0x39);
|
||||
spi_master_write_data_byte(0x00);
|
||||
spi_master_write_data_byte(0x01);
|
||||
spi_master_write_data_byte(0x03);
|
||||
spi_master_write_data_byte(0x10);
|
||||
|
||||
spi_master_write_command(0xE1); //Gamma ‘-’polarity Correction Characteristics Setting
|
||||
spi_master_write_data_byte(0x03);
|
||||
spi_master_write_data_byte(0x1D);
|
||||
spi_master_write_data_byte(0x07);
|
||||
spi_master_write_data_byte(0x06);
|
||||
spi_master_write_data_byte(0x2E);
|
||||
spi_master_write_data_byte(0x2C);
|
||||
spi_master_write_data_byte(0x29);
|
||||
spi_master_write_data_byte(0x2D);
|
||||
spi_master_write_data_byte(0x2E);
|
||||
spi_master_write_data_byte(0x2E);
|
||||
spi_master_write_data_byte(0x37);
|
||||
spi_master_write_data_byte(0x3F);
|
||||
spi_master_write_data_byte(0x00);
|
||||
spi_master_write_data_byte(0x00);
|
||||
spi_master_write_data_byte(0x02);
|
||||
spi_master_write_data_byte(0x10);
|
||||
|
||||
spi_master_write_command(0x13); //Normal Display Mode On
|
||||
vTaskDelay(10 / portTICK_PERIOD_MS);
|
||||
|
||||
spi_master_write_command(0x29); //Display On
|
||||
vTaskDelay(100 / portTICK_PERIOD_MS);
|
||||
|
||||
vTaskDelay(50 / portTICK_PERIOD_MS);
|
||||
|
||||
gpio_pad_select_gpio(TTGO_T_WRISTBAND__BL_GPIO);
|
||||
gpio_set_direction(TTGO_T_WRISTBAND__BL_GPIO, GPIO_MODE_OUTPUT);
|
||||
gpio_set_level(TTGO_T_WRISTBAND__BL_GPIO, 1);
|
||||
}
|
||||
|
||||
void display_clear_line(uint8_t line, bool invert)
|
||||
{
|
||||
uint16_t _x1 = 0 + TTGO_T_WRISTBAND_OFFSETX;
|
||||
uint16_t _x2 = TTGO_T_WRISTBAND_WIDTH + TTGO_T_WRISTBAND_OFFSETX - 1;
|
||||
uint16_t _y1 = line * 8 + TTGO_T_WRISTBAND_OFFSETY + TTGO_T_WRISTBAND_INTERFACE_OFFSETY;
|
||||
uint16_t _y2 = line * 8 + 8 + TTGO_T_WRISTBAND_OFFSETY - 1 + TTGO_T_WRISTBAND_INTERFACE_OFFSETY;
|
||||
|
||||
spi_master_write_command(0x2A); // set column(x) address
|
||||
spi_master_write_addr(_x1, _x2);
|
||||
spi_master_write_command(0x2B); // set Page(y) address
|
||||
spi_master_write_addr(_y1, _y2);
|
||||
spi_master_write_command(0x2C); // Memory Write
|
||||
for (int i = _x1; i <= _x2; i++)
|
||||
{
|
||||
uint16_t size = _y2 - _y1 + 1;
|
||||
spi_master_write_color(invert ? display_get_color() : BLACK, size);
|
||||
}
|
||||
}
|
||||
|
||||
void display_clear(void)
|
||||
{
|
||||
uint16_t _x1 = 0 + TTGO_T_WRISTBAND_OFFSETX;
|
||||
uint16_t _x2 = TTGO_T_WRISTBAND_WIDTH + TTGO_T_WRISTBAND_OFFSETX - 1;
|
||||
uint16_t _y1 = 0 + TTGO_T_WRISTBAND_OFFSETY;
|
||||
uint16_t _y2 = TTGO_T_WRISTBAND_HEIGHT + TTGO_T_WRISTBAND_OFFSETY - 1;
|
||||
|
||||
spi_master_write_command(0x2A); // set column(x) address
|
||||
spi_master_write_addr(_x1, _x2);
|
||||
spi_master_write_command(0x2B); // set Page(y) address
|
||||
spi_master_write_addr(_y1, _y2);
|
||||
spi_master_write_command(0x2C); // Memory Write
|
||||
for (int i = _x1; i <= _x2; i++)
|
||||
{
|
||||
uint16_t size = _y2 - _y1 + 1;
|
||||
spi_master_write_color(BLACK, size);
|
||||
}
|
||||
}
|
||||
|
||||
void display_on(bool on)
|
||||
{
|
||||
// TODO
|
||||
}
|
||||
|
||||
void display_data(uint8_t *data, size_t length, uint8_t line, uint8_t offset, bool invert)
|
||||
{
|
||||
uint16_t _x1 = offset + TTGO_T_WRISTBAND_OFFSETX + TTGO_T_WRISTBAND_INTERFACE_OFFSETX;
|
||||
uint16_t _x2 = offset + length + TTGO_T_WRISTBAND_OFFSETX - 1 + TTGO_T_WRISTBAND_INTERFACE_OFFSETX;
|
||||
uint16_t _y1 = line * 8 + TTGO_T_WRISTBAND_OFFSETY + TTGO_T_WRISTBAND_INTERFACE_OFFSETY;
|
||||
uint16_t _y2 = line * 8 + 8 + TTGO_T_WRISTBAND_OFFSETY - 1 + TTGO_T_WRISTBAND_INTERFACE_OFFSETY;
|
||||
|
||||
spi_master_write_command(0x2A); // set column(x) address
|
||||
spi_master_write_addr(_x1, _x2);
|
||||
spi_master_write_command(0x2B); // set Page(y) address
|
||||
spi_master_write_addr(_y1, _y2);
|
||||
spi_master_write_command(0x2C); //Memory Write
|
||||
|
||||
uint8_t msbColor = (display_get_color() >> 8) & 0xFF;
|
||||
uint8_t lsbColor = display_get_color() & 0xFF;
|
||||
|
||||
for (int j = 0; j < 8; j++)
|
||||
{
|
||||
uint8_t color[length * 2];
|
||||
int index = 0;
|
||||
|
||||
for (int i = 0; i < length; i++)
|
||||
{
|
||||
bool bit = (data[i] & (1 << j));
|
||||
if (invert)
|
||||
{
|
||||
bit = !bit;
|
||||
}
|
||||
color[index++] = bit ? msbColor : 0x00;
|
||||
color[index++] = bit ? lsbColor : 0x00;
|
||||
}
|
||||
spi_master_write_data(color, length * 2);
|
||||
}
|
||||
}
|
||||
|
||||
void display_flipped(bool flipped)
|
||||
{
|
||||
spi_master_write_command(0x36); //Memory Data Access Control
|
||||
if (flipped)
|
||||
{
|
||||
spi_master_write_data_byte(TTGO_T_WRISTBAND_LANDSCAPE_FLIPPED);
|
||||
}
|
||||
else
|
||||
{
|
||||
spi_master_write_data_byte(TTGO_T_WRISTBAND_LANDSCAPE);
|
||||
}
|
||||
}
|
||||
28
components/display-ttgo-st7735/st7735.h
Normal file
28
components/display-ttgo-st7735/st7735.h
Normal file
@ -0,0 +1,28 @@
|
||||
#ifndef DISPLAY_ST7735_H_
|
||||
#define DISPLAY_ST7735_H_
|
||||
|
||||
#include "driver/spi_master.h"
|
||||
|
||||
// M5stickC
|
||||
#define TTGO_T_WRISTBAND_WIDTH 160
|
||||
#define TTGO_T_WRISTBAND_HEIGHT 80
|
||||
#define TTGO_T_WRISTBAND_MOSI_GPIO 19
|
||||
#define TTGO_T_WRISTBAND_SCLK_GPIO 18
|
||||
#define TTGO_T_WRISTBAND_CS_GPIO 5
|
||||
#define TTGO_T_WRISTBAND_DC_GPIO 23
|
||||
#define TTGO_T_WRISTBAND_RESET_GPIO 26
|
||||
#define TTGO_T_WRISTBAND__BL_GPIO 27
|
||||
|
||||
#define TTGO_T_WRISTBAND_OFFSETX 1
|
||||
#define TTGO_T_WRISTBAND_OFFSETY 26
|
||||
|
||||
#define TTGO_T_WRISTBAND_INTERFACE_OFFSETX 16
|
||||
#define TTGO_T_WRISTBAND_INTERFACE_OFFSETY 8
|
||||
|
||||
#define TTGO_T_WRISTBAND_LANDSCAPE_FLIPPED 0x60
|
||||
#define TTGO_T_WRISTBAND_LANDSCAPE 0xA0
|
||||
|
||||
#define SPI_COMMAND_MODE 0
|
||||
#define SPI_DATA_MODE 1
|
||||
|
||||
#endif
|
||||
7
components/imu-ttgo-lsm9ds1/CMakeLists.txt
Normal file
7
components/imu-ttgo-lsm9ds1/CMakeLists.txt
Normal file
@ -0,0 +1,7 @@
|
||||
idf_component_register(
|
||||
SRCS
|
||||
"lsm9ds1.c"
|
||||
INCLUDE_DIRS "."
|
||||
PRIV_REQUIRES
|
||||
i2c-main
|
||||
)
|
||||
127
components/imu-ttgo-lsm9ds1/lsm9ds1.c
Normal file
127
components/imu-ttgo-lsm9ds1/lsm9ds1.c
Normal file
@ -0,0 +1,127 @@
|
||||
// Copyright 2020 Lukas Haubaum
|
||||
//
|
||||
// Licensed under the GNU Affero General Public License, Version 3;
|
||||
// you may not use this file except in compliance with the License.
|
||||
// You may obtain a copy of the License at
|
||||
|
||||
// https://www.gnu.org/licenses/agpl-3.0.html
|
||||
//
|
||||
// Unless required by applicable law or agreed to in writing, software
|
||||
// distributed under the License is distributed on an "AS IS" BASIS,
|
||||
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
// See the License for the specific language governing permissions and
|
||||
// limitations under the License.
|
||||
#include <stdio.h>
|
||||
#include <time.h>
|
||||
|
||||
#include "driver/i2c.h"
|
||||
#include "esp_log.h"
|
||||
|
||||
#include "i2c-main.h"
|
||||
|
||||
#include "lsm9ds1.h"
|
||||
|
||||
float aRes, gRes;
|
||||
|
||||
void lsm9ds1_i2c_read_bytes(uint8_t driver_addr, uint8_t start_addr, uint8_t number_Bytes, uint8_t *read_buffer)
|
||||
{
|
||||
i2c_cmd_handle_t cmd;
|
||||
cmd = i2c_cmd_link_create();
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (driver_addr << 1) | I2C_MASTER_WRITE, true);
|
||||
i2c_master_write_byte(cmd, start_addr, true);
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (driver_addr << 1) | I2C_MASTER_READ, true);
|
||||
i2c_master_read(cmd, read_buffer, number_Bytes, I2C_MASTER_LAST_NACK);
|
||||
i2c_master_stop(cmd);
|
||||
ESP_ERROR_CHECK_WITHOUT_ABORT(i2c_master_cmd_begin(I2C_NUM_0, cmd, 10 / portTICK_PERIOD_MS));
|
||||
i2c_cmd_link_delete(cmd);
|
||||
}
|
||||
|
||||
void lsm9ds1_i2c_write_bytes(uint8_t driver_addr, uint8_t start_addr, uint8_t number_Bytes, uint8_t *write_buffer)
|
||||
{
|
||||
i2c_cmd_handle_t cmd;
|
||||
cmd = i2c_cmd_link_create();
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (driver_addr << 1) | I2C_MASTER_WRITE, true);
|
||||
|
||||
i2c_master_write_byte(cmd, start_addr, true);
|
||||
i2c_master_write(cmd, write_buffer, number_Bytes, true);
|
||||
|
||||
i2c_master_stop(cmd);
|
||||
ESP_ERROR_CHECK_WITHOUT_ABORT(i2c_master_cmd_begin(I2C_NUM_0, cmd, 10 / portTICK_PERIOD_MS));
|
||||
i2c_cmd_link_delete(cmd);
|
||||
}
|
||||
|
||||
int lsm9ds1_start(void)
|
||||
{
|
||||
unsigned char regdata;
|
||||
// init ACC
|
||||
regdata = 0x38;
|
||||
lsm9ds1_i2c_write_bytes(ACC_ADDR, CTRL_REG5_A, 1, ®data);
|
||||
regdata = 0xC0;
|
||||
lsm9ds1_i2c_write_bytes(ACC_ADDR, CTRL_REG6_A, 1, ®data);
|
||||
|
||||
lsm9ds1_i2c_read_bytes(ACC_ADDR, CTRL_REG6_A, 1, ®data);
|
||||
regdata &= ~(0b00011000);
|
||||
regdata |= ACCELRANGE_16G;
|
||||
lsm9ds1_i2c_write_bytes(ACC_ADDR, CTRL_REG6_A, 1, ®data);
|
||||
|
||||
// init gyr
|
||||
regdata = 0xC0;
|
||||
lsm9ds1_i2c_write_bytes(GYR_ADDR, CTRL_REG1_G, 1, ®data);
|
||||
lsm9ds1_i2c_read_bytes(GYR_ADDR, CTRL_REG1_G, 1, ®data);
|
||||
regdata &= ~(0b00011000);
|
||||
regdata |= GYROSCALE_500DPS;
|
||||
lsm9ds1_i2c_write_bytes(GYR_ADDR, CTRL_REG1_G, 1, ®data);
|
||||
|
||||
aRes = 16.0 / 32768.0;
|
||||
gRes = 500.0 / 32768.0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
void lsm9ds1_get_accel_adc(int16_t *ax, int16_t *ay, int16_t *az)
|
||||
{
|
||||
|
||||
uint8_t buf[6];
|
||||
lsm9ds1_i2c_read_bytes(ACC_ADDR, OUT_X_L_A, 6, buf);
|
||||
|
||||
*ax = ((int16_t)buf[0] << 8) | buf[1];
|
||||
*ay = ((int16_t)buf[2] << 8) | buf[3];
|
||||
*az = ((int16_t)buf[4] << 8) | buf[5];
|
||||
}
|
||||
void lsm9ds1_get_gyro_adc(int16_t *gx, int16_t *gy, int16_t *gz)
|
||||
{
|
||||
|
||||
uint8_t buf[6];
|
||||
lsm9ds1_i2c_read_bytes(GYR_ADDR, OUT_X_L_G, 6, buf);
|
||||
|
||||
*gx = ((uint16_t)buf[0] << 8) | buf[1];
|
||||
*gy = ((uint16_t)buf[2] << 8) | buf[3];
|
||||
*gz = ((uint16_t)buf[4] << 8) | buf[5];
|
||||
}
|
||||
|
||||
void lsm9ds1_get_accel_data(float *ax, float *ay, float *az)
|
||||
{
|
||||
|
||||
int16_t accX = 0;
|
||||
int16_t accY = 0;
|
||||
int16_t accZ = 0;
|
||||
lsm9ds1_get_accel_adc(&accX, &accY, &accZ);
|
||||
|
||||
*ax = (float)accX * aRes;
|
||||
*ay = (float)accY * aRes;
|
||||
*az = (float)accZ * aRes;
|
||||
}
|
||||
|
||||
void lsm9ds1_get_gyro_data(float *gx, float *gy, float *gz)
|
||||
{
|
||||
int16_t gyroX = 0;
|
||||
int16_t gyroY = 0;
|
||||
int16_t gyroZ = 0;
|
||||
lsm9ds1_get_gyro_adc(&gyroX, &gyroY, &gyroZ);
|
||||
|
||||
*gx = (float)gyroX * gRes;
|
||||
*gy = (float)gyroY * gRes;
|
||||
*gz = (float)gyroZ * gRes;
|
||||
}
|
||||
138
components/imu-ttgo-lsm9ds1/lsm9ds1.h
Normal file
138
components/imu-ttgo-lsm9ds1/lsm9ds1.h
Normal file
@ -0,0 +1,138 @@
|
||||
/*
|
||||
Note: The MPU6886 is an I2C sensor and uses the Arduino Wire library.
|
||||
Because the sensor is not 5V tolerant, we are using a 3.3 V 8 MHz Pro Mini or
|
||||
a 3.3 V Teensy 3.1. We have disabled the internal pull-ups used by the Wire
|
||||
library in the Wire.h/twi.c utility file. We are also using the 400 kHz fast
|
||||
I2C mode by setting the TWI_FREQ to 400000L /twi.h utility file.
|
||||
*/
|
||||
#ifndef _IMU_LSM9DS1_H_
|
||||
#define _IMU_LSM9DS1_H_
|
||||
|
||||
#include "stdio.h"
|
||||
|
||||
#define ID_AG 0x6F
|
||||
#define ID_A 0x6F
|
||||
#define ID_G 0x6F
|
||||
#define ID_M 0x3D
|
||||
|
||||
#define FILENAME "/dev/i2c-1"
|
||||
#define MAG_ADDR 0x1E
|
||||
#define ACC_ADDR 0x6B
|
||||
#define GYR_ADDR 0x6B
|
||||
|
||||
// Shared Accelerometer/Gyroscope Addresses
|
||||
#define WHO_AM_I_AG 0x0F
|
||||
#define CTRL_REG1_AG 0x10
|
||||
#define CTRL_REG2_AG 0x11
|
||||
#define CTRL_REG3_AG 0x12
|
||||
#define OUT_TEMP_L_AG 0x15
|
||||
#define OUT_TEMP_H_AG 0x16
|
||||
#define REG_STATUS_REG_AG 0x17
|
||||
#define CTRL_REG4_AG 0x1E
|
||||
#define CTRL_REG5_AG 0x1F
|
||||
#define CTRL_REG6_AG 0x20
|
||||
#define CTRL_REG7_AG 0x21
|
||||
#define CTRL_REG8_AG 0x22
|
||||
#define CTRL_REG9_AG 0x23
|
||||
#define CTRL_REG10_AG 0x24
|
||||
|
||||
// Gyroscope addresses
|
||||
#define WHO_AM_I_G 0x0F
|
||||
#define CTRL_REG1_G 0x10
|
||||
#define CTRL_REG2_G 0x11
|
||||
#define CTRL_REG3_G 0x12
|
||||
#define OUT_X_L_G 0x18
|
||||
#define OUT_X_H_G 0x19
|
||||
#define OUT_Y_L_G 0x1A
|
||||
#define OUT_Y_H_G 0x1B
|
||||
#define OUT_Z_L_G 0x1C
|
||||
#define OUT_Z_H_G 0x1D
|
||||
|
||||
// Accelerometer addresses
|
||||
#define WHO_AM_I_A 0x0F
|
||||
#define CTRL_REG5_A 0x1F
|
||||
#define CTRL_REG6_A 0x20
|
||||
#define CTRL_REG7_A 0x21
|
||||
#define OUT_X_L_A 0x28
|
||||
#define OUT_X_H_A 0x29
|
||||
#define OUT_Y_L_A 0x2A
|
||||
#define OUT_Y_H_A 0x2B
|
||||
#define OUT_Z_L_A 0x2C
|
||||
#define OUT_Z_H_A 0x2D
|
||||
|
||||
// Magnetometer addresses
|
||||
#define WHO_AM_I_M 0x0F
|
||||
#define CTRL_REG1_M 0x20
|
||||
#define CTRL_REG2_M 0x21
|
||||
#define CTRL_REG3_M 0x22
|
||||
#define CTRL_REG4_M 0x23
|
||||
#define CTRL_REG5_M 0x24
|
||||
#define REG_STATUS_REG_M 0x27
|
||||
#define OUT_X_L_M 0x28
|
||||
#define OUT_X_H_M 0x29
|
||||
#define OUT_Y_L_M 0x2A
|
||||
#define OUT_Y_H_M 0x2B
|
||||
#define OUT_Z_L_M 0x2C
|
||||
#define OUT_Z_H_M 0x2D
|
||||
#define REG_CFG_M 0x30
|
||||
#define INT_SRC_M 0x31
|
||||
|
||||
// Settings
|
||||
#define ACCELRANGE_2G 0x0 << 3
|
||||
#define ACCELRANGE_16G 0x1 << 3
|
||||
#define ACCELRANGE_4G 0x2 << 3
|
||||
#define ACCELRANGE_8G 0x3 << 3
|
||||
|
||||
#define ACCELDATARATE_POWERDOWN 0x0 << 4
|
||||
#define ACCELDATARATE_3_125HZ 0x1 << 4
|
||||
#define ACCELDATARATE_6_25HZ 0x2 << 4
|
||||
#define ACCELDATARATE_12_5HZ 0x3 << 4
|
||||
#define ACCELDATARATE_25HZ 0x4 << 4
|
||||
#define ACCELDATARATE_50HZ 0x5 << 4
|
||||
#define ACCELDATARATE_100HZ 0x6 << 4
|
||||
#define ACCELDATARATE_200HZ 0x7 << 4
|
||||
#define ACCELDATARATE_400HZ 0x8 << 4
|
||||
#define ACCELDATARATE_800HZ 0x9 << 4
|
||||
#define ACCELDATARATE_1600HZ 0xa << 4
|
||||
|
||||
#define MAGGAIN_4GAUSS 0x0 << 5
|
||||
#define MAGGAIN_8GAUSS 0x1 << 5
|
||||
#define MAGGAIN_12GAUSS 0x2 << 5
|
||||
#define MAGGAIN_16GAUSS 0x3 << 5
|
||||
|
||||
#define MAGDATARATE_3_125HZ 0x0 << 2
|
||||
#define MAGDATARATE_6_25HZ 0x1 << 2
|
||||
#define MAGDATARATE_12_5HZ 0x2 << 2
|
||||
#define MAGDATARATE_25HZ 0x3 << 2
|
||||
#define MAGDATARATE_50HZ 0x4 << 2
|
||||
#define MAGDATARATE_100HZ 0x5 << 2
|
||||
|
||||
#define GYROSCALE_245DPS 0x0 << 4
|
||||
#define GYROSCALE_500DPS 0x1 << 4
|
||||
#define GYROSCALE_2000DPS 0x2 << 4
|
||||
|
||||
/* Conversions */
|
||||
#define GRAVITY (9.80665F)
|
||||
|
||||
#define ACCEL_MG_LSB_2G (0.061F)
|
||||
#define ACCEL_MG_LSB_4G (0.122F)
|
||||
#define ACCEL_MG_LSB_8G (0.244F)
|
||||
#define ACCEL_MG_LSB_16G (0.732F) // Is this right? Was expecting 0.488F
|
||||
|
||||
#define MAG_MGAUSS_4GAUSS (0.16F)
|
||||
#define MAG_MGAUSS_8GAUSS (0.32F)
|
||||
#define MAG_MGAUSS_12GAUSS (0.48F)
|
||||
#define MAG_MGAUSS_16GAUSS (0.58F)
|
||||
|
||||
#define GYRO_DPS_DIGIT_245DPS (0.00875F)
|
||||
#define GYRO_DPS_DIGIT_500DPS (0.01750F)
|
||||
#define GYRO_DPS_DIGIT_2000DPS (0.07000F)
|
||||
|
||||
int lsm9ds1_start(void);
|
||||
void lsm9ds1_get_accel_adc(int16_t *ax, int16_t *ay, int16_t *az);
|
||||
void lsm9ds1_get_gyro_adc(int16_t *gx, int16_t *gy, int16_t *gz);
|
||||
|
||||
void lsm9ds1_get_accel_data(float *ax, float *ay, float *az);
|
||||
void lsm9ds1_get_gyro_data(float *gx, float *gy, float *gz);
|
||||
|
||||
#endif
|
||||
@ -1,6 +1,6 @@
|
||||
idf_component_register(
|
||||
SRCS
|
||||
"button-input.c"
|
||||
"custom-input.c"
|
||||
INCLUDE_DIRS "."
|
||||
PRIV_REQUIRES
|
||||
interface
|
||||
@ -19,13 +19,13 @@
|
||||
|
||||
#include "interface.h"
|
||||
|
||||
#include "button-input.h"
|
||||
#include "custom-input.h"
|
||||
|
||||
static float input_states[INTERFACE_COMMANDS_SIZE];
|
||||
static float input_trigger_state[INTERFACE_COMMANDS_SIZE];
|
||||
static int input_command_mapping[INTERFACE_COMMANDS_SIZE];
|
||||
|
||||
void button_input_check(interface_command_t command)
|
||||
void custom_input_check(interface_command_t command)
|
||||
{
|
||||
int button_level = gpio_get_level(input_command_mapping[command]);
|
||||
|
||||
@ -79,25 +79,25 @@ void button_input_check(interface_command_t command)
|
||||
}
|
||||
}
|
||||
|
||||
void button_input_task(void *pvParameter)
|
||||
void custom_input_task(void *pvParameter)
|
||||
{
|
||||
while (1)
|
||||
{
|
||||
button_input_check(INTERFACE_COMMAND_SET);
|
||||
custom_input_check(INTERFACE_COMMAND_SET);
|
||||
if (!interface_is_idle())
|
||||
{
|
||||
button_input_check(INTERFACE_COMMAND_RST);
|
||||
button_input_check(INTERFACE_COMMAND_MID);
|
||||
button_input_check(INTERFACE_COMMAND_RHT);
|
||||
button_input_check(INTERFACE_COMMAND_LFT);
|
||||
button_input_check(INTERFACE_COMMAND_DWN);
|
||||
button_input_check(INTERFACE_COMMAND_UP);
|
||||
custom_input_check(INTERFACE_COMMAND_RST);
|
||||
custom_input_check(INTERFACE_COMMAND_MID);
|
||||
custom_input_check(INTERFACE_COMMAND_RHT);
|
||||
custom_input_check(INTERFACE_COMMAND_LFT);
|
||||
custom_input_check(INTERFACE_COMMAND_DWN);
|
||||
custom_input_check(INTERFACE_COMMAND_UP);
|
||||
}
|
||||
vTaskDelay(INTERFACE_INPUT_TICKS_MS / portTICK_PERIOD_MS);
|
||||
}
|
||||
}
|
||||
|
||||
void button_input_start(void)
|
||||
void custom_input_start(void)
|
||||
{
|
||||
gpio_config_t io_conf;
|
||||
|
||||
@ -124,5 +124,5 @@ void button_input_start(void)
|
||||
input_trigger_state[i] = INTERFACE_LONG_STATE_SECONDS;
|
||||
}
|
||||
|
||||
xTaskCreate(&button_input_task, "button_input_task", 4096, NULL, 5, NULL);
|
||||
xTaskCreate(&custom_input_task, "custom_input_task", 4096, NULL, 5, NULL);
|
||||
}
|
||||
@ -33,6 +33,6 @@
|
||||
*
|
||||
*
|
||||
*/
|
||||
void button_input_start(void);
|
||||
void custom_input_start(void);
|
||||
|
||||
#endif
|
||||
@ -4,5 +4,5 @@ idf_component_register(
|
||||
INCLUDE_DIRS "."
|
||||
PRIV_REQUIRES
|
||||
interface
|
||||
imu-mpu6886
|
||||
imu-m5-mpu6886
|
||||
)
|
||||
8
components/interface-ttgo-input/CMakeLists.txt
Normal file
8
components/interface-ttgo-input/CMakeLists.txt
Normal file
@ -0,0 +1,8 @@
|
||||
idf_component_register(
|
||||
SRCS
|
||||
"ttgo-input.c"
|
||||
INCLUDE_DIRS "."
|
||||
PRIV_REQUIRES
|
||||
interface
|
||||
imu-ttgo-lsm9ds1
|
||||
)
|
||||
44
components/interface-ttgo-input/ttgo-input.c
Normal file
44
components/interface-ttgo-input/ttgo-input.c
Normal file
@ -0,0 +1,44 @@
|
||||
// Copyright 2020 Lukas Haubaum
|
||||
//
|
||||
// Licensed under the GNU Affero General Public License, Version 3;
|
||||
// you may not use this file except in compliance with the License.
|
||||
// You may obtain a copy of the License at
|
||||
|
||||
// https://www.gnu.org/licenses/agpl-3.0.html
|
||||
//
|
||||
// Unless required by applicable law or agreed to in writing, software
|
||||
// distributed under the License is distributed on an "AS IS" BASIS,
|
||||
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
// See the License for the specific language governing permissions and
|
||||
// limitations under the License.
|
||||
#include <stdio.h>
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "driver/gpio.h"
|
||||
#include "esp_log.h"
|
||||
|
||||
#include "lsm9ds1.h"
|
||||
|
||||
#include "interface.h"
|
||||
|
||||
#include "ttgo-input.h"
|
||||
|
||||
void ttgo_input_task(void *pvParameter)
|
||||
{
|
||||
float ax = 0;
|
||||
float ay = 0;
|
||||
float az = 0;
|
||||
|
||||
while (1)
|
||||
{
|
||||
lsm9ds1_get_accel_data(&ax, &ay, &az);
|
||||
// ESP_LOGI(INTERFACE_LOG, "ax: %f ay:%f az:%f", ax, ay, az);
|
||||
vTaskDelay(INTERFACE_INPUT_TICKS_MS / portTICK_PERIOD_MS);
|
||||
}
|
||||
}
|
||||
|
||||
void ttgo_input_start(void)
|
||||
{
|
||||
lsm9ds1_start();
|
||||
xTaskCreate(&ttgo_input_task, "ttgo_input_task", 4096, NULL, 5, NULL);
|
||||
}
|
||||
30
components/interface-ttgo-input/ttgo-input.h
Normal file
30
components/interface-ttgo-input/ttgo-input.h
Normal file
@ -0,0 +1,30 @@
|
||||
// Copyright 2020 Lukas Haubaum
|
||||
//
|
||||
// Licensed under the GNU Affero General Public License, Version 3;
|
||||
// you may not use this file except in compliance with the License.
|
||||
// You may obtain a copy of the License at
|
||||
|
||||
// https://www.gnu.org/licenses/agpl-3.0.html
|
||||
//
|
||||
// Unless required by applicable law or agreed to in writing, software
|
||||
// distributed under the License is distributed on an "AS IS" BASIS,
|
||||
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
// See the License for the specific language governing permissions and
|
||||
// limitations under the License.
|
||||
/**
|
||||
* @file
|
||||
*
|
||||
* @brief execute interface commands via simple push buttons
|
||||
*
|
||||
*/
|
||||
#ifndef _ttgo_input_H_
|
||||
#define _ttgo_input_H_
|
||||
|
||||
/**
|
||||
* @brief
|
||||
*
|
||||
*
|
||||
*/
|
||||
void ttgo_input_start(void);
|
||||
|
||||
#endif
|
||||
@ -1,15 +1,18 @@
|
||||
set(priv_requires "ena" "ena-eke-proxy" "display" "rtc" "wifi-controller" )
|
||||
|
||||
if(CONFIG_ENA_INTERFACE_CUSTOM)
|
||||
list(APPEND priv_requires "display-ssd1306" "rtc-ds3231")
|
||||
elseif(ENA_INTERFACE_M5STICKC)
|
||||
list(APPEND priv_requires "display-st7735s" "rtc-bm8563" "imu-mpu6886" "pmu-axp192")
|
||||
elseif(ENA_INTERFACE_M5STICKC_PLUS)
|
||||
list(APPEND priv_requires "display-st7789" "rtc-bm8563" "imu-mpu6886" "pmu-axp192")
|
||||
list(APPEND priv_requires "display-custom-ssd1306" "rtc-custom-ds3231")
|
||||
elseif(CONFIG_ENA_INTERFACE_M5STICKC)
|
||||
list(CONFIG_APPEND priv_requires "display-m5-st7735s" "rtc-m5-bm8563" "imu-m5-mpu6886" "pmu-m5-axp192")
|
||||
elseif(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
|
||||
list(APPEND priv_requires "display-m5-st7789" "rtc-m5-bm8563" "imu-m5-mpu6886" "pmu-m5-axp192")
|
||||
elseif(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
|
||||
list(APPEND priv_requires "display-ttgo-st7735" "imu-ttgo-lsm9ds1")
|
||||
else()
|
||||
list(APPEND priv_requires "display-ssd1306" "rtc-ds3231") # uncomment for custom device with SSD1306 und DS3231
|
||||
# list(APPEND priv_requires "display-st7735s" "rtc-bm8563" "imu-mpu6886" "pmu-axp192") # uncomment for M5StickC
|
||||
# list(APPEND priv_requires "display-st7789" "rtc-bm8563" "imu-mpu6886" "pmu-axp192") # uncomment for M5StickC PLUS
|
||||
list(APPEND priv_requires "display-custom-ssd1306" "rtc-custom-ds3231") # uncomment for custom device with SSD1306 und DS3231
|
||||
# list(APPEND priv_requires "display-m5-st7735s" "rtc-m5-bm8563" "imu-m5-mpu6886" "pmu-m5-axp192") # uncomment for M5StickC
|
||||
# list(APPEND priv_requires "display-m5-st7789" "rtc-m5-bm8563" "imu-m5-mpu6886" "pmu-m5-axp192") # uncomment for M5StickC PLUS
|
||||
# list(APPEND priv_requires "display-ttgo-st7735" "imu-ttgo-lsm9ds1") # uncomment for TTGO T-Wristband
|
||||
endif()
|
||||
|
||||
idf_component_register(
|
||||
|
||||
@ -21,6 +21,9 @@ menu "ENA Interface"
|
||||
|
||||
config ENA_INTERFACE_M5STICKC_PLUS
|
||||
bool "M5StickC PLUS"
|
||||
|
||||
config ENA_INTERFACE_TTGO_T_WRISTBAND
|
||||
bool "TTGO T-Wristband"
|
||||
endchoice
|
||||
|
||||
endmenu
|
||||
@ -27,6 +27,10 @@
|
||||
#include "axp192.h"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
|
||||
#include "lsm9ds1.h"
|
||||
#endif
|
||||
|
||||
#include "interface.h"
|
||||
|
||||
static bool runTask = true;
|
||||
@ -75,7 +79,7 @@ void interface_debug_dwn(void)
|
||||
void interface_debug_task(void *pvParameter)
|
||||
{
|
||||
|
||||
#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
|
||||
#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS) || defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
|
||||
float ax = 0;
|
||||
float ay = 0;
|
||||
float az = 0;
|
||||
@ -94,6 +98,14 @@ void interface_debug_task(void *pvParameter)
|
||||
mpu6886_get_accel_data(&ax, &ay, &az);
|
||||
mpu6886_get_gyro_data(&gx, &gy, &gz);
|
||||
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
|
||||
lsm9ds1_get_accel_data(&ax, &ay, &az);
|
||||
lsm9ds1_get_gyro_data(&gx, &gy, &gz);
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS) || defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
|
||||
char data_chars[32];
|
||||
sprintf(data_chars, "acc x:%3.2f", ax);
|
||||
display_text_line(data_chars, 2, false);
|
||||
@ -108,8 +120,10 @@ void interface_debug_task(void *pvParameter)
|
||||
sprintf(data_chars, "gyr z:%3.2f", gz);
|
||||
display_text_line(data_chars, 7, false);
|
||||
|
||||
float bat_v = axp192_get_bat_voltage();
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
|
||||
float bat_v = axp192_get_bat_voltage();
|
||||
sprintf(data_chars, "Battery: %.2f V", bat_v);
|
||||
display_text_line(data_chars, 7, false);
|
||||
|
||||
@ -123,6 +137,10 @@ void interface_debug_task(void *pvParameter)
|
||||
void interface_debug_start(void)
|
||||
{
|
||||
|
||||
#if defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
|
||||
lsm9ds1_start();
|
||||
#endif
|
||||
|
||||
interface_register_command_callback(INTERFACE_COMMAND_RST, &interface_debug_rst);
|
||||
interface_register_command_callback(INTERFACE_COMMAND_SET, &interface_debug_set);
|
||||
interface_register_command_callback(INTERFACE_COMMAND_LFT, &interface_debug_lft);
|
||||
|
||||
@ -111,15 +111,10 @@ void interface_input_rht(void)
|
||||
if (current_cursor > current_max_index)
|
||||
{
|
||||
current_max_index = current_cursor;
|
||||
strcpy(current_char_set, char_set_uppercase);
|
||||
current_text[current_cursor] = current_text[current_cursor - 1];
|
||||
}
|
||||
|
||||
current_char_index = 0;
|
||||
current_text[current_cursor] = current_char_set[current_char_index];
|
||||
}
|
||||
else
|
||||
{
|
||||
interface_input_set_char_set();
|
||||
}
|
||||
interface_input_set_char_set();
|
||||
}
|
||||
}
|
||||
|
||||
@ -149,7 +144,12 @@ void interface_input_mid(void)
|
||||
{
|
||||
strcpy(current_char_set, char_set_uppercase);
|
||||
}
|
||||
current_char_index = 0;
|
||||
|
||||
if (current_char_index >= strlen(current_char_set))
|
||||
{
|
||||
current_char_index = 0;
|
||||
}
|
||||
|
||||
current_text[current_cursor] = current_char_set[current_char_index];
|
||||
}
|
||||
|
||||
|
||||
@ -40,7 +40,9 @@ void interface_init_label(void)
|
||||
interface_text_headline_info.text[EN] = "INFO";
|
||||
interface_text_headline_debug.text[EN] = "DEBUG";
|
||||
|
||||
interface_text_wifi_waiting.text[EN] = "Waiting...";
|
||||
interface_text_wifi_scanning.text[EN] = "Scanning...";
|
||||
interface_text_wifi_connecting.text[EN] = "Connecting...";
|
||||
interface_text_wifi_nothing.text[EN] = "None...";
|
||||
|
||||
interface_text_settings_locale.text[EN] = "Language:";
|
||||
@ -104,7 +106,9 @@ void interface_init_label(void)
|
||||
interface_text_headline_info.text[DE] = "INFOS";
|
||||
interface_text_headline_debug.text[DE] = "DEBUG";
|
||||
|
||||
interface_text_wifi_waiting.text[DE] = "Warten...";
|
||||
interface_text_wifi_scanning.text[DE] = "Scannen...";
|
||||
interface_text_wifi_connecting.text[DE] = "Verbinden...";
|
||||
interface_text_wifi_nothing.text[DE] = "Keine...";
|
||||
|
||||
interface_text_settings_locale.text[DE] = "Sprache:";
|
||||
|
||||
@ -43,6 +43,12 @@ void interface_wifi_input_rst(char *text, uint8_t cursor)
|
||||
|
||||
void interface_wifi_input_set(char *text, uint8_t cursor)
|
||||
{
|
||||
|
||||
display_clear();
|
||||
display_menu_headline(interface_get_label_text(&interface_text_headline_wifi), true, 0);
|
||||
|
||||
display_text_line_column(interface_get_label_text(&interface_text_wifi_connecting), 4, 1, false);
|
||||
|
||||
memcpy(current_wifi_config.sta.password, text, cursor + 1);
|
||||
|
||||
ESP_LOGD(INTERFACE_LOG, "ssid: '%s' password '%s'", current_wifi_config.sta.ssid, current_wifi_config.sta.password);
|
||||
@ -173,15 +179,16 @@ void interface_wifi_scan(void)
|
||||
if (!interface_wifi_working)
|
||||
{
|
||||
interface_wifi_working = true;
|
||||
display_clear();
|
||||
display_menu_headline(interface_get_label_text(&interface_text_headline_wifi), true, 0);
|
||||
|
||||
display_text_line_column(interface_get_label_text(&interface_text_wifi_waiting), 4, 1, false);
|
||||
ena_eke_proxy_pause();
|
||||
|
||||
memset(ap_info, 0, sizeof(ap_info));
|
||||
ap_count = 0;
|
||||
ap_index = 0;
|
||||
ap_selected = 0;
|
||||
ena_eke_proxy_pause();
|
||||
|
||||
display_clear();
|
||||
display_menu_headline(interface_get_label_text(&interface_text_headline_wifi), true, 0);
|
||||
|
||||
display_text_line_column(interface_get_label_text(&interface_text_wifi_scanning), 4, 1, false);
|
||||
wifi_controller_scan(ap_info, &ap_count, interface_wifi_display);
|
||||
|
||||
@ -194,8 +201,11 @@ void interface_wifi_reconnect(void)
|
||||
{
|
||||
if (!interface_wifi_working)
|
||||
{
|
||||
display_clear();
|
||||
display_menu_headline(interface_get_label_text(&interface_text_headline_wifi), true, 0);
|
||||
display_text_line_column(interface_get_label_text(&interface_text_wifi_connecting), 4, 1, false);
|
||||
interface_wifi_working = true;
|
||||
wifi_controller_reconnect(NULL);
|
||||
wifi_controller_reconnect(&interface_wifi_set);
|
||||
interface_wifi_working = false;
|
||||
}
|
||||
}
|
||||
|
||||
@ -98,7 +98,9 @@ interface_label_t interface_text_report_pending;
|
||||
interface_label_t interface_text_report_success;
|
||||
interface_label_t interface_text_report_fail;
|
||||
|
||||
interface_label_t interface_text_wifi_waiting;
|
||||
interface_label_t interface_text_wifi_scanning;
|
||||
interface_label_t interface_text_wifi_connecting;
|
||||
interface_label_t interface_text_wifi_nothing;
|
||||
|
||||
interface_label_t interface_text_data_del[6];
|
||||
|
||||
14
main/main.c
14
main/main.c
@ -34,13 +34,17 @@
|
||||
#include "sdkconfig.h"
|
||||
|
||||
#ifdef CONFIG_ENA_INTERFACE_CUSTOM
|
||||
#include "button-input.h"
|
||||
#include "custom-input.h"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
|
||||
#include "m5-input.h"
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND
|
||||
#include "ttgo-input.h"
|
||||
#endif
|
||||
|
||||
void time_sync_notification_cb(struct timeval *tv)
|
||||
{
|
||||
time_t time = (time_t)tv->tv_sec;
|
||||
@ -88,15 +92,19 @@ void app_main(void)
|
||||
// start with main interface
|
||||
interface_main_start();
|
||||
|
||||
// start button input
|
||||
// start input
|
||||
#if defined(CONFIG_ENA_INTERFACE_CUSTOM)
|
||||
button_input_start();
|
||||
custom_input_start();
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENA_INTERFACE_M5STICKC) || defined(CONFIG_ENA_INTERFACE_M5STICKC_PLUS)
|
||||
m5_input_start();
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENA_INTERFACE_TTGO_T_WRISTBAND)
|
||||
ttgo_input_start();
|
||||
#endif
|
||||
|
||||
wifi_controller_reconnect(NULL);
|
||||
|
||||
while (1)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user